We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules without heat spreaders in a row

NEMIX RAM

NEMIX RAM 1TB 16x64GB DDR5 4800 CL40 1.1V 2Rx4 ECC RDIMM Supermicro H13SSH-E

SKU CH-ZXXX-TKP60

1TB DDR5 4800 ECC registered RDIMM kit with 16x64GB modules at 1.1V CL40 for Supermicro H13SSH-E servers

  • Capacity1TB (16 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1TB 16X64GB

Show 30 more configurations
  • 1TB capacity from 16 x 64GB modules maximises server memory density
  • DDR5 4800 speed with CL40 timing delivers rated bandwidth for Supermicro H13SSH-E
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1V operation at 2Rx4 rank matches motherboard memory controller requirements
  • 288-pin RDIMM form factor ensures exact fit in Supermicro H13SSH-E DIMM slots

Capacity and purpose

This kit provides 1TB of DDR5 ECC registered memory across 16 modules of 64GB each. It is built for servers using the Supermicro H13SSH-E motherboard that require registered DIMMs with error correction.

Compatibility checks

Verify that your motherboard manual lists DDR5 4800 RDIMM support and the approved population order for 16 modules. Confirm the board accepts 2Rx4 registered ECC at 1.1V CL40 before ordering.

Thermals and power

Modules operate at 1.1V without heat spreaders, relying on chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller when all 16 slots are populated. No active cooling components are included.

Highlights

  • 1TB capacity from 16 x 64GB modules maximises server memory density
  • DDR5 4800 speed with CL40 timing delivers rated bandwidth for Supermicro H13SSH-E
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1V operation at 2Rx4 rank matches motherboard memory controller requirements
  • 288-pin RDIMM form factor ensures exact fit in Supermicro H13SSH-E DIMM slots

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K16
Capacity1TB (16 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 16X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 1TB kit ship as sixteen 64GB modules or do I need to buy additional sticks?

The kit contains exactly sixteen 64GB RDIMMs, giving the full 1TB capacity in one package.

Why is the kit listed as 2Rx4 CL40 at 4800 MT/s instead of a lower latency or different rank?

The Supermicro H13SSH-E memory controller expects 2Rx4 registered ECC modules at 1.1V with CL40 timing; this spec-matched kit is recognised at full speed across all populated slots.

Will DDR5-4800 actually run at 4800 MT/s on a fully loaded H13SSH-E board?

Yes — the registered ECC design offloads the controller so every one of the sixteen slots operates at the rated 4800 MT/s without down-clocking.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.