NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
256 GB DDR5 5600 ECC registered RDIMM kit (2×128 GB, CL46, 1.1 V) validated for Supermicro H13SSH servers
This 256 GB kit contains two 128 GB modules built to the DDR5 5600 standard with CL46 timing and 1.1 V operation. Registered ECC architecture and 2Rx4 organisation match the memory controller expectations of the Supermicro H13SSH motherboard so the full capacity is recognised at rated speed.
The RDIMM modules use Samsung, Micron or Hynix chips without heat spreaders, keeping the profile low for dense server chassis. Registered buffering reduces electrical load on the controller when all slots are populated, while on-die ECC corrects single-bit errors before they affect workloads.
DDR5 RDIMM topology on this platform enforces strict slot-order rules and maximum capacity per channel that differ by BIOS revision. The kit delivers the specified 5600 MT/s rate only when installed according to the motherboard manual; otherwise the system may down-clock or fail to post. Buyers who need higher frequencies, lower latencies or non-ECC operation should look elsewhere.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-724K2 |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 2X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Yes, the modules are DDR5 5600 (PC5-44800) with CL46 timing and 1.10 V, matching the memory controller specification so the board recognises the full 256 GB at rated speed.
The kit uses 288-pin registered RDIMMs; the H13SSH provides standard DDR5 RDIMM slots with the matching key notch, so each 128 GB module seats directly without adapters.
Install the first module in the slot designated as DIMM 1A (or CPU1 Channel A Slot 1) in the H13SSH manual, then the second in the matching slot on the next channel; this sequence lets the memory controller initialise the full 256 GB correctly.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?