We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 288-pin DDR5 RDIMM modules, no heat spreader, 256GB kit

NEMIX RAM

NEMIX RAM 256GB (2x128GB) DDR5 6400 CL52 1.1V 2Rx4 ECC Registered RDIMM memory upgrade for GIGABYTE MS34-CP0

SKU CH-0E37-HW4RF

256 GB DDR5 6400 CL52 ECC registered RDIMM kit built for the GIGABYTE MS34-CP0 motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

Show 18 more configurations
  • 256 GB total capacity from two 128 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency delivers rated throughput without downclocking
  • Registered ECC design corrects single-bit errors and stabilises fully populated channels
  • 1 V operation matches the motherboard's voltage spec for reliable recognition
  • 288-pin RDIMM form factor fits the GIGABYTE MS34-CP0 memory slots exactly

Server-grade DDR5 kit

This 256 GB kit contains two 128 GB DDR5 RDIMMs rated at 6400 MT/s with CL52 latency and 1.1 V operation. It is built for the GIGABYTE MS34-CP0 motherboard and targets administrators who need maximum registered ECC capacity in a two-module population.

Replaces smaller or slower RDIMMs

The jump is worthwhile when the platform demands 2Rx4 registered modules to reach full rated speed across all populated slots. Systems limited to lower-density or unbuffered memory will not accept this kit, and boards requiring different rank configurations or voltages will not post with it installed.

Straightforward slot installation

Align the 288-pin edge connector with the keyed DIMM socket and press until the retention clips engage; no heat spreader means clearance is rarely an issue. The most common error is ignoring the motherboard manual's population sequence, which can leave capacity unrecognised or force the controller to a lower speed.

Highlights

  • 256 GB total capacity from two 128 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency delivers rated throughput without downclocking
  • Registered ECC design corrects single-bit errors and stabilises fully populated channels
  • 1 V operation matches the motherboard's voltage spec for reliable recognition
  • 288-pin RDIMM form factor fits the GIGABYTE MS34-CP0 memory slots exactly

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 288-pin RDIMM modules fit the GIGABYTE MS34-CP0 motherboard slots?

Yes. The kit uses the 288-pin DDR5 RDIMM form factor that the GIGABYTE MS34-CP0 requires; it is not a UDIMM or SODIMM.

What is the correct population order when installing both 128 GB modules?

Consult the motherboard manual for the approved DIMM population sequence; the board's memory-population rules dictate which slots must be filled first.

Do the modules need a heatsink or active cooling for long-term operation?

The modules ship without a heat spreader; registered ECC DDR5 at 1.1 V is designed to run within spec in standard server airflow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.