We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 2TB DDR5 4800 CL40 16x128GB ECC RDIMM Supermicro H13DSG-O-CPU

SKU CH-KE52-2P2JX

A 2 TB DDR5 server memory kit of sixteen 128 GB registered ECC RDIMMs running at 4800 MT/s with CL40 timing and 1.1 V operation, validated for the Supermicro H13DSG-O-CPU motherboard

  • Capacity2TB (16 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 2TB 16X128GB

Show 30 more configurations
  • 2TB capacity with 16 modules of 128GB each for maximum server memory density
  • DDR5 4800 speed with CL40 latency delivers rated performance on Supermicro H13DSG-O-CPU
  • Registered ECC architecture corrects single-bit errors and stabilizes fully populated slots
  • 1V operation at 2Rx4 rank matches the memory controller's exact requirements
  • 288-pin RDIMM form factor ensures correct fitment for this motherboard

Server-Specific 2TB DDR5 Kit

This NEMIX RAM kit delivers 2TB of DDR5 memory in a 16 x 128GB configuration built for the Supermicro H13DSG-O-CPU motherboard. The 288-pin RDIMM modules operate at 4800MHz with CL40 latency and 1.1V power. Registered ECC design ensures data integrity for mission-critical workloads.

Build Integration Requirements

The 288-pin RDIMM form factor fits only motherboards that accept registered DDR5 DIMMs, not UDIMM or SODIMM slots. Fully populating all 16 slots requires the board's memory controller to support this capacity and population order. The 2Rx4 rank structure and 1.1V voltage must match the platform's electrical specification for stable operation.

Capacity and Headroom Limits

Sixteen 128GB modules provide 2TB total capacity for large-scale virtualisation, in-memory databases and high-performance computing. Registered buffering allows full-slot population without signal degradation, while ECC corrects single-bit errors on the fly. Systems needing more than 2TB or faster than DDR5-4800 speeds will require a different platform.

Highlights

  • 2TB capacity with 16 modules of 128GB each for maximum server memory density
  • DDR5 4800 speed with CL40 latency delivers rated performance on Supermicro H13DSG-O-CPU
  • Registered ECC architecture corrects single-bit errors and stabilizes fully populated slots
  • 1V operation at 2Rx4 rank matches the memory controller's exact requirements
  • 288-pin RDIMM form factor ensures correct fitment for this motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K16
Capacity2TB (16 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content2TB 16X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 2TB DDR5 4800 kit run without throttling in a fully populated Supermicro H13DSG-O-CPU under sustained load?

Registered ECC RDIMM architecture offloads the memory controller so all 16 slots run at the rated 4800 MT/s without downclocking, while ECC corrects single-bit errors on the fly.

How much heat and power does the 16-module kit add when the server runs 24/7?

Each 128 GB module operates at 1.1 V with no heat spreader; total draw scales with the 2Rx4 density, so plan airflow for 16 bare DRAM stacks under continuous load.

What must the Supermicro H13DSG-O-CPU already have for this 288-pin RDIMM kit to be recognised at full 2 TB capacity?

The board needs a DDR5-compatible CPU and BIOS that supports 2Rx4 registered DIMMs populated in the validated slot order; consult the motherboard manual for the exact population sequence.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.