We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 32GB DDR4 3200 CL22 2Rx4 ECC RDIMM SuperMicro M12SWA-TF WRX80 memory upgrade

SKU CH-K3QN-FZBYJ

A 32 GB DDR4 3200 CL22 2Rx4 ECC registered DIMM built for SuperMicro M12SWA-TF WRX80 systems

  • Capacity32GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB capacity expands server memory headroom
  • DDR4 3200 speed matches platform specifications
  • ECC registered design protects data integrity
  • 2 V operation reduces power draw
  • Validated for SuperMicro M12SWA-TF WRX80 motherboard

System-Specific 32 GB DDR4 RDIMM

This NEMIX RAM module delivers 32 GB of DDR4 3200 registered ECC memory in a single 288-pin DIMM. It operates at 1.2 V with CL22 latency and a 2Rx4 organisation. The part is validated for the SuperMicro M12SWA-TF WRX80 motherboard.

Suited for capacity upgrades on that platform

IT teams expanding memory on a SuperMicro M12SWA-TF WRX80 system will find the correct speed, voltage and rank configuration here. Builders using a different motherboard or needing unbuffered DIMMs should look elsewhere.

Single-module package with no extras

The box contains only the 32 GB RDIMM itself — no heat spreader, no additional cables and no software utilities. Installation follows the motherboard manual’s standard DIMM-population rules.

Highlights

  • 32 GB capacity expands server memory headroom
  • DDR4 3200 speed matches platform specifications
  • ECC registered design protects data integrity
  • 2 V operation reduces power draw
  • Validated for SuperMicro M12SWA-TF WRX80 motherboard

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-324K1
Capacity32GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (1X32GB) DDR4 3200MHZ PC4-25600 2Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the SuperMicro M12SWA-TF WRX80 motherboard need to support DDR4 ECC registered DIMMs for this 32GB module to work?

Yes, the board must accept DDR4 288-pin ECC RDIMMs; the module is a 2Rx4 registered stick that only operates in slots wired for registered ECC memory.

Can I mix this CL22 3200 MT/s stick with slower DDR4 ECC RDIMMs already installed in the same server?

The system will run all populated channels at the lowest common speed and loosest timings, so slower modules will pull this kit down to their rated frequency and latency.

After installation, how can I confirm the module is running at 3200 MT/s with ECC active?

Check the BIOS memory information screen or run a tool such as dmidecode to verify the reported speed is 3200 MT/s, the part number shows MR25600-324K1, and ECC status reads enabled.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.