We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR5 4800 CL40 2Rx8 ECC Registered RDIMM H13SSH memory upgrade

SKU CH-R0MH-W65FM

32 GB DDR5 4800 registered ECC RDIMM built for Supermicro H13SSH motherboards

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 32GB

Show 30 more configurations
  • 32 GB DDR5 4800 MT/s capacity for data-intensive workloads
  • CL40 latency and 1.1 V operation match server memory-controller specs
  • 2Rx8 registered ECC design corrects single-bit errors and supports full-slot population
  • 288-pin RDIMM form factor fits Supermicro H13SSH motherboard slots
  • Major OEM Samsung, Micron or Hynix chips provide enterprise-grade reliability

Exact-match server upgrade

This 32 GB DDR5 module delivers 4800 MT/s at CL40 with 1.1 V registered ECC. The 2Rx8 organization and 288-pin RDIMM form factor match the Supermicro H13SSH memory controller requirements so the system recognises full capacity immediately.

Registered ECC constraints

Registered buffering offloads the memory controller to allow full-slot population at rated speed, while ECC corrects single-bit errors on the fly. The board must accept 288-pin RDIMMs; UDIMM or SODIMM variants will not fit or function in this platform.

CL40 timing decides fit

The CAS latency of 40 cycles is the single specification the memory controller expects for stable operation at 4800 MT/s. A module with different latency will either downclock or fail to post, so verify the board's qualified-vendor list before purchase.

Highlights

  • 32 GB DDR5 4800 MT/s capacity for data-intensive workloads
  • CL40 latency and 1.1 V operation match server memory-controller specs
  • 2Rx8 registered ECC design corrects single-bit errors and supports full-slot population
  • 288-pin RDIMM form factor fits Supermicro H13SSH motherboard slots
  • Major OEM Samsung, Micron or Hynix chips provide enterprise-grade reliability

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I choose the 32GB 2Rx8 CL40 module or a different capacity for my Supermicro H13SSH?

The 32GB 2Rx8 CL40 DDR5-4800 RDIMM is the exact-match upgrade for the Supermicro H13SSH; its rank, voltage and timing match the board's memory controller so it is recognised at full capacity and runs at rated speed.

What does the DDR5-4800 (PC5-38400) speed rating deliver once installed in the server?

In the H13SSH the module operates at 4800 MT/s with CL40 latency at 1.10 V, providing the bandwidth and timing the platform expects for stable full-population operation.

How does the 288-pin Registered ECC RDIMM interface affect real-world use?

The registered DDR5 RDIMM interface buffers address and command signals and adds ECC, allowing every slot to run fully populated at 4800 MT/s while correcting single-bit errors on the fly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.