We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 384GB (6x64GB) DDR4 2400 PC4-19200 CL17 1.2V 288-Pin ECC LRDIMM 4Rx4 Server Memory

SKU CH-7BQG-2Z9C8

Six 64 GB DDR4 ECC LRDIMM modules at 2400 MT/s with CL17 latency and 1.2 V for high-capacity server workloads

  • Capacity384GB (6 x 64GB)
  • Type288-Pin DDR4 LRDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes

Capacity 384GB (6 x 64GB)

  • 384GB total capacity with six 64GB modules
  • Load Reduced DIMM technology reduces electrical load on the memory bus
  • ECC support detects and corrects single-bit data errors
  • DDR4 2400 speed rated at PC4-19200 bandwidth
  • 20V operating voltage for efficient server operation

384GB DDR4 LRDIMM kit for server workloads

This 384GB kit provides six 64GB DDR4 2400 LRDIMM modules built with ECC and a load-reduced design. It targets administrators expanding memory capacity on qualified server motherboards that require registered, error-correcting memory for virtualization, database or compute clusters.

Thermal and power profile in typical operation

Each module runs at 1.20V with a CL17 latency rating, keeping voltage low for dense configurations. The load-reduced buffer reduces electrical loading on the memory bus, which helps maintain signal integrity across all six slots without adding active cooling components.

Build and connector implications for daily use

The 288-pin LRDIMM form factor fits standard DDR4 server DIMM sockets and uses major OEM Samsung, Micron or Hynix ICs without heat spreaders. The 4Rx4 organisation maximises rank density per channel, so installers must verify that the platform supports quad-rank load-reduced modules in a six-DIMM population.

Highlights

  • 384GB total capacity with six 64GB modules
  • Load Reduced DIMM technology reduces electrical load on the memory bus
  • ECC support detects and corrects single-bit data errors
  • DDR4 2400 speed rated at PC4-19200 bandwidth
  • 20V operating voltage for efficient server operation

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC LRDIMM Load Reduced Memory
Part NumberML19200-944K6
Capacity384GB (6 x 64GB)
Type288-Pin DDR4 LRDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 ECC LRDIMM Load Reduced Server Motherboard Compatible

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the six 64 GB DDR4 2400 LRDIMM modules in a server motherboard, and what step is often missed?

Align each 288-pin module with the slot key, press straight down until both latches click, then verify the BIOS detects all 384 GB at 2400 MT/s; the missed step is enabling ECC and LRDIMM support in firmware before boot.

What maintenance or replacement will the 4Rx4 ECC LRDIMM kit need over its service life?

No scheduled maintenance is required; if a module fails the ECC logging will identify it, and the individual 64 GB stick can be replaced without disturbing the remaining five modules.

What limit appears first when the 1.2 V CL17 LRDIMM kit runs sustained heavy workloads?

The DDR4 2400 PC4-19200 bandwidth ceiling is reached before thermal throttling, because the load-reduced design lowers electrical load on the memory controller during continuous operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.