We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules with black chips and gold contacts

NEMIX RAM

NEMIX RAM 512GB (4x128GB) DDR5 4800 CL40 1.1V 288-Pin ECC RDIMM Server Memory Upgrade

SKU CH-1KTX-1P0RC

512 GB DDR5 4800 ECC registered server kit with four 128 GB modules at CL40 and 1.1 V

  • Capacity512GB (4 x 128GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 512 GB total capacity from four 128 GB modules
  • DDR5 4800 speed with PC5-38400 bandwidth
  • ECC registered design protects data integrity
  • 1 V operation reduces server power draw
  • Validated for SuperMicro SYS-121H-TNR, SYS-221H-TNR, SYS-221H-TN24R

Server Memory Kit

This 512GB kit contains four 128GB DDR5 4800 RDIMM modules built for Supermicro servers. ECC and registered operation provide the error correction and signal integrity required by mission-critical workloads. The kit is validated for the SYS-121H-TNR, SYS-221H-TNR and SYS-221H-TN24R platforms.

DDR5 4800 Interface Limits

DDR5 4800 sets the maximum transfer rate at PC5-38400 with a CL40 latency at 1.10V. Registered DIMMs add a clock cycle for buffering, so the memory controller must support registered ECC operation. Systems limited to lower speeds or unbuffered DIMMs cannot use this kit.

4Rx4 Rank Configuration

Each 128GB module uses a 4Rx4 organisation that increases density but places higher electrical load on the memory bus. The server motherboard must explicitly support 4Rx4 registered DIMMs at this capacity. Boards qualified only for 1Rx4 or 2Rx4 ranks will not recognise the full 512GB.

Highlights

  • 512 GB total capacity from four 128 GB modules
  • DDR5 4800 speed with PC5-38400 bandwidth
  • ECC registered design protects data integrity
  • 1 V operation reduces server power draw
  • Validated for SuperMicro SYS-121H-TNR, SYS-221H-TNR, SYS-221H-TN24R

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-744K4
Capacity512GB (4 x 128GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content512GB (4X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Should I choose the 512GB kit or look for a smaller capacity?

The kit provides 512GB total across four 128GB modules. Choose it if your Supermicro server needs maximum registered ECC capacity; otherwise select a smaller kit that matches your workload.

What does the DDR5 4800 CL40 rating deliver in a live server?

It runs at 4800 MT/s with CAS latency 40 at 1.1V, giving registered ECC bandwidth suited for heavy multi-threaded workloads on compatible Supermicro platforms.

How does the 288-pin RDIMM interface limit speed or capacity?

The 288-pin DDR5 RDIMM form factor supports the 4800 MT/s spec and 4Rx4 organisation; registered buffering allows the 512GB kit capacity on qualified Supermicro motherboards.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.