We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 RDIMM modules, black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR4 3200 ECC RDIMM CL22 SuperMicro M12SWA-TF WRX80 memory upgrade

SKU CH-JDWH-3Z3DG

A 64GB DDR4-3200 ECC registered RDIMM kit of four 16GB modules at CL22 and 1.2V for the SuperMicro M12SWA-TF WRX80 motherboard

  • Capacity64GB (4 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 64GB 4X16GB

Show 4 more configurations
  • 64 GB total capacity from four 16 GB modules
  • DDR4 3200 speed with PC4-25600 bandwidth for server workloads
  • ECC registered RDIMM design protects data integrity
  • CL22 CAS latency at 1.2 V operating voltage
  • Validated for SuperMicro M12SWA-TF WRX80 motherboard

SuperMicro M12SWA-TF WRX80 compatible kit

This 64 GB kit contains four 16 GB DDR4 3200 ECC RDIMM modules built for the SuperMicro M12SWA-TF WRX80 motherboard. Registered buffering and on-die ECC protect data integrity in server and workstation workloads. The kit runs at 1.2 V with CL22 latency across all four slots.

Replaces non-ECC or slower DDR4 DIMMs

Swapping unbuffered or lower-speed memory for this registered ECC kit adds error correction and multi-rank density the platform expects. The jump is worth it when the workload demands sustained throughput and uptime rather than raw single-thread speed. Systems already running registered ECC at 3200 see no gain.

Four 288-pin modules install in minutes

Align each notch, press until the latches click, then verify population order in the board manual. The most common issue is mixing ranks or speeds across channels, which prevents boot. Another is leaving a slot empty in a populated channel, which disables quad-channel bandwidth.

Highlights

  • 64 GB total capacity from four 16 GB modules
  • DDR4 3200 speed with PC4-25600 bandwidth for server workloads
  • ECC registered RDIMM design protects data integrity
  • CL22 CAS latency at 1.2 V operating voltage
  • Validated for SuperMicro M12SWA-TF WRX80 motherboard

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-628K4
Capacity64GB (4 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (4X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 288-pin DDR4 RDIMM form factor fit the SuperMicro M12SWA-TF WRX80 motherboard slots?

Yes, the 288-pin DDR4 RDIMM modules are the correct form factor for the SuperMicro M12SWA-TF WRX80 motherboard memory slots.

What is the correct installation sequence for the four 16GB modules on this WRX80 board?

Install the four 16GB modules in the four slots of a single channel set per CPU, following the motherboard manual slot order for 2Rx8 registered DIMMs.

Will the Samsung, Micron or Hynix chips on these modules require firmware updates later?

No, the memory chips do not require firmware updates; the modules operate at 1.2V with CL22 timing once installed and recognised by the system BIOS.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.