NEMIX RAM DDR5 64GB 4800MHz CL40 2Rx4 ECC RDIMM H13SSF memory upgrade
- 64GB
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
A 64 GB registered ECC DDR5 kit of four 16 GB modules at 4800 MT/s with CL40 timing and 1.1 V, built for the Supermicro H13SSH motherboard
Size 64GB 4X16GB
This 64GB kit contains four 16GB DDR5 RDIMM modules built for the Supermicro H13SSH motherboard. Each module runs at 4800MHz with CL40 latency at 1.1V. The registered ECC design matches the board's memory-controller requirements for full-capacity recognition.
The 1Rx8 registered ECC layout lets every slot run fully populated while correcting single-bit errors on the fly. Builders needing unbuffered UDIMM or SODIMM form factors should look elsewhere because this kit uses the 288-pin RDIMM interface the H13SSH requires.
Four 16GB modules deliver 64GB total capacity at the specified DDR5-4800 data rate. The kit handles workloads that fit within this capacity and speed envelope; configurations demanding larger densities or higher frequencies exceed what this package provides.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 4X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The kit is spec-matched to the H13SSH memory-population rules; consult your motherboard manual for the approved slot sequence so all four 16GB modules are recognised at full capacity.
No, the H13SSH requires 288-pin Registered RDIMMs; mixing registered and unbuffered modules prevents the memory controller from initialising the array.
Enter the BIOS or use a hardware-monitoring utility to confirm the memory frequency reads 4800 MT/s, CAS latency shows CL40, and the DIMM voltage reports 1.10V.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?