We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black memory chips and gold edge connectors, no heat spreaders

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5 5600 CL46 ECC UDIMM 2Rx8 Supermicro H13SRD-F/H13SRE-F memory upgrade

SKU CH-SFW3-4TSQP

96GB DDR5 ECC UDIMM kit (2x48GB) at 5600MHz CL46, validated for Supermicro H13SRD-F/H13SRE-F motherboards

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 2X48GB

  • 96 GB capacity from two 48 GB modules for high-density workloads
  • DDR5 5600 speed rated at PC5-44800 for fast data throughput
  • ECC protection detects and corrects single-bit errors to prevent data corruption
  • 2Rx8 unbuffered UDIMM matches Supermicro H13SRD-F/H13SRE-F memory population rules
  • 1 V operation with CL46 latency meets exact board specifications

Exact-match DDR5 ECC UDIMM kit

This NEMIX RAM kit provides 96GB of DDR5 memory in a matched pair of 48GB modules. It is built for the Supermicro H13SRD-F and H13SRE-F motherboards, using the 288-pin unbuffered ECC UDIMM form factor those boards require. The modules run at 5600 MT/s with a CAS latency of 46 at 1.1V. Error-correcting code protects data integrity in always-on workloads.

Upgrade from lower-capacity DDR5 ECC UDIMMs

The jump is worth it when your current configuration leaves headroom unused and your applications hit the memory ceiling. Adding this 96GB kit fills two slots with the exact rank, voltage, and timing the memory controller expects, so the system recognises the full capacity and runs at the rated 5600 speed. It replaces mismatched or smaller modules that force downclocking or limit total addressable memory.

Limited to boards that accept unbuffered ECC UDIMMs

This memory only works in platforms wired for 288-pin DDR5 unbuffered ECC UDIMMs; it will not fit or function in registered DIMM, SODIMM, or non-ECC consumer slots. The Supermicro H13SRD-F and H13SRE-F are validated targets, but any other board must explicitly support this module type, voltage, and population rules. Buyers needing registered memory, higher frequencies, or different form factors cannot use this kit.

Highlights

  • 96 GB capacity from two 48 GB modules for high-density workloads
  • DDR5 5600 speed rated at PC5-44800 for fast data throughput
  • ECC protection detects and corrects single-bit errors to prevent data corruption
  • 2Rx8 unbuffered UDIMM matches Supermicro H13SRD-F/H13SRE-F memory population rules
  • 1 V operation with CL46 latency meets exact board specifications

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 288-pin DDR5 UDIMM modules fit the Supermicro H13SRD-F motherboard slots?

Yes, the 288-pin DDR5 UDIMM form factor matches the slots on the Supermicro H13SRD-F and H13SRE-F motherboards; the kit is spec-matched to the board's memory population rules.

What BIOS setting or population order is commonly missed when installing this 2Rx8 ECC kit?

The motherboard manual specifies the approved DIMM population order for 2Rx8 modules; install the two 48 GB sticks in the slots listed first in that order so the memory controller recognises the full 96 GB at DDR5-5600.

Does the ECC function on these 48 GB modules require any periodic maintenance or replacement?

ECC operates automatically on every read and write; no user maintenance is needed, and the modules are covered by a lifetime replacement warranty if a hardware fault ever develops.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.