We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board DDR5 RDIMM memory module 288-pin no heat spreader

NEMIX RAM

NEMIX RAM DDR5 5600 96GB ECC RDIMM 2Rx4 CL46 1.1V memory upgrade for GIGABYTE MS34-CP0

SKU CH-SWK6-R3F8D

96 GB DDR5-5600 ECC RDIMM kit with 2Rx4 registered architecture and CL46 timing for GIGABYTE MS34-CP0 servers

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB

Show 18 more configurations
  • 96 GB capacity for large server workloads
  • DDR5 5600 speed with CL46 latency for rated performance
  • ECC registered design corrects errors and stabilises full population
  • 1 V operation matches the motherboard's memory controller spec
  • 288-pin RDIMM form factor fits the GIGABYTE MS34-CP0 board

Capacity and fit

This 96GB DDR5 5600 ECC RDIMM kit is built for the GIGABYTE MS34-CP0 motherboard. The 2Rx4 registered layout matches the board's population rules so every slot can be filled at the rated speed without downclocking.

Registered ECC benefit

Registered buffering removes electrical load from the memory controller while ECC corrects single-bit errors in flight. Together they keep a fully populated server stable under sustained workloads and prevent silent data corruption.

Physical installation

The 288-pin RDIMM form factor fits only DDR5 RDIMM slots; it will not seat in UDIMM or SODIMM sockets. No heat spreader is fitted, so clearance inside dense chassis is maximised but airflow over the chips must be provided by the system fans.

Highlights

  • 96 GB capacity for large server workloads
  • DDR5 5600 speed with CL46 latency for rated performance
  • ECC registered design corrects errors and stabilises full population
  • 1 V operation matches the motherboard's memory controller spec
  • 288-pin RDIMM form factor fits the GIGABYTE MS34-CP0 board

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 2Rx4 ECC RDIMM modules require any firmware updates or periodic replacement on the GIGABYTE MS34-CP0?

No firmware updates or scheduled replacement are needed; the registered ECC design runs at the rated 1.1V and CL46 for the life of the server.

What limits sustained throughput when all slots are populated with 96GB DDR5-5600 RDIMMs?

The memory controller’s maximum supported bandwidth at 5600 MT/s and the registered buffer’s timing budget set the ceiling under continuous load.

How much heat and power do these 1.1V modules generate during 24/7 operation?

Each DIMM draws 1.1V at the rated speed; without a heat spreader, airflow across the 288-pin modules keeps temperatures within JEDEC limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.