We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM MR38400-328K6 192GB 6x32GB DDR5 4800 CL40 ECC RDIMM Supermicro H13SSF

SKU CH-CERY-1RJGB

192 GB DDR5-4800 ECC registered RDIMM kit (6 × 32 GB, CL40, 1.1 V) validated for Supermicro H13SSF motherboards

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 6X32GB

Show 30 more configurations
  • 192 GB total capacity from six 32 GB modules
  • DDR5 4800 speed with CL40 latency for rated performance
  • Registered ECC design corrects single-bit errors automatically
  • 1 V operation matches the board's memory controller spec
  • Verified fit for Supermicro H13SSF motherboard

Server-grade DDR5 ECC RDIMM kit

This 192GB kit delivers six 32GB DDR5-4800 registered ECC modules built for the Supermicro H13SSF motherboard. Each DIMM runs at 1.10V with CL40 latency and a 2Rx8 organisation, matching the board's memory controller requirements exactly. The registered architecture buffers address and command signals so every slot stays stable at full population.

Replacing slower or smaller DDR5 RDIMMs

Upgrade from lower-capacity or lower-speed DDR5 registered kits when your workloads need more simultaneous threads or larger in-memory datasets. The jump is worth it when the current configuration forces memory swapping or limits virtual-machine density on this specific platform.

192GB headroom for dense virtualization

Six 32GB modules fill the supported slots and provide ample room for heavily consolidated VMs, container fleets or large database buffers. Capacity runs out when the application set exceeds the motherboard's maximum supported memory or when a workload demands higher bandwidth than DDR5-4800 can supply.

Highlights

  • 192 GB total capacity from six 32 GB modules
  • DDR5 4800 speed with CL40 latency for rated performance
  • Registered ECC design corrects single-bit errors automatically
  • 1 V operation matches the board's memory controller spec
  • Verified fit for Supermicro H13SSF motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does this kit use the 288-pin DDR5 RDIMM form factor that the Supermicro H13SSF requires?

Yes, the kit contains six 32GB modules built as 288-pin DDR5 RDIMMs, which is the exact registered form factor the H13SSF motherboard expects.

What population order should I follow when installing all six modules on the H13SSF?

Install the DIMMs in the sequence listed in the Supermicro H13SSF manual; the board requires a specific slot order for full 192GB capacity and registered ECC operation.

Will the 2Rx8 registered ECC modules need any firmware updates or periodic replacement?

No firmware updates are required for the memory itself; ECC corrects single-bit errors on the fly, and the modules are rated for continuous server operation at 1.1V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.