We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules without heat spreaders in a 128GB kit

NEMIX RAM

NEMIX RAM MR44800-924K2 128GB 2x64GB DDR5 5600 CL46 ECC Registered RDIMM memory upgrade

SKU CH-P5J5-D1FQ6

128 GB DDR5-5600 registered ECC kit with two 64 GB modules at 1.1 V and CL46 for GIGABYTE MS34-CP0 motherboards

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 2X64GB

Show 18 more configurations
  • 128 GB total capacity from a 2 x 64 GB kit
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • Registered ECC design with 2Rx4 rank for multi-slot stability
  • CL46 latency at 1.10 V operating voltage
  • Verified fit for GIGABYTE MS34-CP0 motherboard

Exact-match server upgrade

This 128GB kit delivers two 64GB DDR5 5600 Registered ECC RDIMMs built to the precise rank, voltage and timing the GIGABYTE MS34-CP0 motherboard expects. The modules install at full rated speed without manual tuning so the memory controller recognises the full capacity immediately.

Registered design for dense population

Registered architecture buffers the command bus so every slot can run fully populated at 1.10V while ECC corrects single-bit errors on the fly. The 288-pin RDIMM form factor fits only boards wired for registered memory; it will not work in UDIMM or SODIMM slots.

DDR5 5600 platform ceiling

The DDR5 5600 interface caps bandwidth at the PC5-44800 level with CL46 latency, so workloads that scale beyond this throughput will need a faster memory standard. Builders requiring higher frequencies or lower latencies must choose a platform that supports them.

Highlights

  • 128 GB total capacity from a 2 x 64 GB kit
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • Registered ECC design with 2Rx4 rank for multi-slot stability
  • CL46 latency at 1.10 V operating voltage
  • Verified fit for GIGABYTE MS34-CP0 motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What speed does the DDR5 5600 PC5-44800 interface actually run at when installed?

The kit operates at DDR5 5600 (PC5-44800) with CL46 latency at 1.10 V, matching the motherboard's rated specification.

What physical slot and form factor does this 288-pin RDIMM require on the GIGABYTE MS34-CP0?

It needs a standard 288-pin DDR5 RDIMM slot; the board accepts registered DIMMs only, not UDIMM or SODIMM.

Which DIMM slots should I populate first on the MS34-CP0 for this 2x64 GB kit?

Consult the motherboard manual for the approved population order; the kit is verified for the board but slot sequence varies by platform.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.