We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR3L ECC registered DIMMs with gold contacts

OWC

OWC 128GB (4x32GB) DDR3L 1600 CL11 4Rx4 ECC RDIMM memory upgrade

SKU CH-6VY5-XGXH4

128 GB kit of four 32 GB DDR3L 1600 ECC registered DIMMs for Supermicro X9 motherboards

  • Capacity128GB (4 x 32GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 128GB (4 x 32GB)

  • 128 GB total capacity from four 32 GB modules
  • DDR3L 1600 speed with CL11 latency for responsive server workloads
  • 35 V low-voltage DDR3L reduces power draw in compatible systems
  • ECC registered design detects and corrects single-bit errors for data integrity
  • Validated for Supermicro X9DRFF, X9DRFR, X9DRG, X9DRH and X9DRi motherboards

128GB DDR3L ECC RDIMM kit

This kit provides 128GB of DDR3L ECC registered memory across four 32GB modules. It is built for workstations and servers that require error correction and registered buffering. Standard desktop computers cannot use this memory type. Mixing it with unbuffered modules is not supported.

DDR3L 1600 CL11 1.35V limits

The modules run at DDR3L 1600 (PC3L-12800) with CL11 latency at 1.35V. This voltage is lower than standard DDR3, so the platform must explicitly support DDR3L operation. Registered buffering adds one clock cycle of address delay, which the memory controller must expect. Systems limited to lower speeds or higher voltages will not be compatible.

240-pin 4Rx4 build for Supermicro X9DR

Each module uses a 240-pin 4Rx4 organisation without a heat spreader, relying on chassis airflow for cooling. The kit is validated for Supermicro X9DRFF, X9DRFR, X9DRG, X9DRH and X9DRi motherboard series. Installation follows standard DIMM slot population rules for the target board.

Highlights

  • 128 GB total capacity from four 32 GB modules
  • DDR3L 1600 speed with CL11 latency for responsive server workloads
  • 35 V low-voltage DDR3L reduces power draw in compatible systems
  • ECC registered design detects and corrects single-bit errors for data integrity
  • Validated for Supermicro X9DRFF, X9DRFR, X9DRG, X9DRH and X9DRi motherboards

Specifications

BrandOWC
Part Number1R6T34R4128S
Capacity128GB (4 x 32GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X9DRFF Series
Supermicro Motherboard X9DRFR Series
Supermicro Motherboard X9DRG Series
Supermicro Motherboard X9DRH Series
Supermicro Motherboard X9DRi Series

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I choose the 128GB kit or buy individual 32GB modules?

The kit supplies four matched 32GB modules for a total of 128GB, ensuring identical timings and rank configuration across all slots.

What does the PC3L-12800 rating deliver in a running system?

It provides a peak transfer rate of 12800 MB/s at 1600 MT/s with CL11 latency, operating at the DDR3L 1.35V voltage level.

How does the 240-pin DDR3L ECC registered interface limit performance?

The registered buffer adds one clock cycle per command, capping usable speed to the JEDEC 1600 MT/s spec and preventing mixing with unbuffered DIMMs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.