OWC 64GB (4x16GB) DDR3L 1600 CL11 2Rx4 ECC Registered RDIMM for HP ProLiant BL465c G7 DL980 G7 memory upgrade
- 64GB (4 x 16GB)
- 240-Pin DDR3L ECC R…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
OWC
128GB DDR3L ECC registered kit with four 32GB modules at 1600MHz CL11 for Supermicro X9 motherboards
Capacity 128GB (4 x 32GB)
This OWC kit provides 128GB of DDR3L ECC registered memory across four 32GB modules. It is built for Supermicro X9DAL, X9DAX, X9DB3, X9DBi and X9DBL motherboards in workstation and server roles. The 1.35V DDR3L 1600 CL11 specification matches the JEDEC standard for these platforms. Buyers needing unbuffered memory or desktop compatibility cannot use this kit.
The four 32GB 4Rx4 modules fill four slots to reach the full 128GB capacity supported by the listed boards. It upgrades systems that currently run smaller registered DIMMs or mixed-rank configurations. The jump is worth it when workloads exceed the existing memory ceiling and the board accepts 4Rx4 registered modules at 1.35V. Systems limited to unbuffered memory or lower maximum capacity will not benefit.
ECC registered operation corrects single-bit errors and reduces electrical load on the memory controller during continuous server workloads. The 1.35V DDR3L voltage lowers power draw compared to standard 1.5V DDR3 during extended runs. CL11 latency at 1600MT/s delivers steady throughput for virtualization, database and file-service tasks. Modules without heat spreaders rely on chassis airflow for thermal stability under load.
| Brand | OWC |
|---|---|
| Part Number | 1R6T34R4128S |
| Capacity | 128GB (4 x 32GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro Motherboard X9DAL Series Supermicro Motherboard X9DAX Series Supermicro Motherboard X9DB3 Series Supermicro Motherboard X9DBi Series Supermicro Motherboard X9DBL Series |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Yes, the 240-pin DDR3L form factor matches the registered DIMM slots on X9DAL, X9DAX, X9DB3, X9DBi and X9DBL series boards.
Install the four 32 GB modules in the same coloured slots per channel; the common mistake is mixing registered and unbuffered DIMMs, which prevents boot.
The ECC logic corrects single-bit errors and logs uncorrectable ones; replace a module when the system log reports repeated corrected or uncorrectable errors on that DIMM.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?