We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two grey rectangular thermal pads 120 by 20 by 2.0 mm

Thermal Grizzly

Thermal Grizzly Minus Pad Pro 2-pack 120x20x2.0mm thermal pad

SKU CH-2CHF-D3CH1

Electrically non-conductive thermal pad in a two-pack sized 120 by 20 by 2.0 mm for SSDs, GPUs and other electronics

  • FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the
  • Outstanding thermal conductivity for demanding components
  • Exceptional compressibility ensures flawless surface contact
  • Electrically non-conductive design prevents short circuits
  • Suitable for SSDs, GPUs and voltage regulators
  • Dimensions 120 x 20 x 2.0 mm fit tight spaces

Thermal Pad for SSDs and GPUs

This Thermal Grizzly Minus Pad Pro pack contains two grey thermal interface pads sized 120 x 20 mm with a 2.0 mm thickness. They are designed to transfer heat from SSDs, GPU coolers, graphics card water blocks, voltage regulators and memory modules. The electrically non-conductive material prevents short circuits while filling gaps between surfaces. Builders upgrading laptop or desktop storage and graphics cooling will find the dimensions suit many M.2 slots and VRM arrays.

Who benefits and who should look elsewhere

The pads suit enthusiasts who need reliable gap-filling on flat components such as M.2 drives or GPU memory chips where a 2.0 mm thickness matches the stock pad. They are less suited for buyers who need a thinner or thicker pad for tighter or looser clearances, or for anyone wanting a paste instead of a pre-cut pad. The two-piece pack also limits coverage for large heatsinks or multiple devices in one session.

Fitting into a cooling build

Each pad can be trimmed with scissors to match the exact footprint of an SSD controller, VRM row or GPU die. Because the material is non-conductive, no insulating tape is required around exposed PCB traces. The 120 mm length allows a single strip to span several memory modules on a graphics card, freeing the builder from cutting many small squares. No curing time is needed, so the system can be reassembled and tested immediately.

Highlights

  • Outstanding thermal conductivity for demanding components
  • Exceptional compressibility ensures flawless surface contact
  • Electrically non-conductive design prevents short circuits
  • Suitable for SSDs, GPUs and voltage regulators
  • Dimensions 120 x 20 x 2.0 mm fit tight spaces

Specifications

BrandThermal Grizzly
ModelTG-MP-P-120-20-20-2
Part NumberTG-MP-P-120-20-20-2
FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the Basic, Advance, and Pro series. The Basic pads are easy to use, provide good thermal conductivity, slightly lower compressibility, and offer an excellent price-performance Ratio.

Questions about this item

What size SSD or GPU cooler will the 120 x 20 mm pad cover?

The pad measures 120 mm by 20 mm, so it fits M.2 2280 SSDs and narrow GPU memory rows; trim it with scissors if the target area is smaller.

Can I stack this 2.0 mm pad on an older 1 mm pad to fill a larger gap?

Stacking pads adds thermal resistance; replace the original material with a single 2.0 mm Minus Pad Pro layer for best conductivity.

How do I confirm the pad is making full contact after installation?

Remove the cooler and check for an even grey imprint across the component surface — no bare spots means the compressibility has closed the gap.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.