我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two grey rectangular thermal pads 120 by 20 by 2.0 mm

Thermal Grizzly

Thermal Grizzly Minus Pad Pro 2-pack 120x20x2.0mm thermal pad

SKU CH-2CHF-D3CH1

Electrically non-conductive thermal pad in a two-pack sized 120 by 20 by 2.0 mm for SSDs, GPUs and other electronics

  • FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the
  • Outstanding thermal conductivity for demanding components
  • Exceptional compressibility ensures flawless surface contact
  • Electrically non-conductive design prevents short circuits
  • Suitable for SSDs, GPUs and voltage regulators
  • Dimensions 120 x 20 x 2.0 mm fit tight spaces

Thermal Pad for SSDs and GPUs

This Thermal Grizzly Minus Pad Pro pack contains two grey thermal interface pads sized 120 x 20 mm with a 2.0 mm thickness. They are designed to transfer heat from SSDs, GPU coolers, graphics card water blocks, voltage regulators and memory modules. The electrically non-conductive material prevents short circuits while filling gaps between surfaces. Builders upgrading laptop or desktop storage and graphics cooling will find the dimensions suit many M.2 slots and VRM arrays.

Who benefits and who should look elsewhere

The pads suit enthusiasts who need reliable gap-filling on flat components such as M.2 drives or GPU memory chips where a 2.0 mm thickness matches the stock pad. They are less suited for buyers who need a thinner or thicker pad for tighter or looser clearances, or for anyone wanting a paste instead of a pre-cut pad. The two-piece pack also limits coverage for large heatsinks or multiple devices in one session.

Fitting into a cooling build

Each pad can be trimmed with scissors to match the exact footprint of an SSD controller, VRM row or GPU die. Because the material is non-conductive, no insulating tape is required around exposed PCB traces. The 120 mm length allows a single strip to span several memory modules on a graphics card, freeing the builder from cutting many small squares. No curing time is needed, so the system can be reassembled and tested immediately.

商品特色

  • Outstanding thermal conductivity for demanding components
  • Exceptional compressibility ensures flawless surface contact
  • Electrically non-conductive design prevents short circuits
  • Suitable for SSDs, GPUs and voltage regulators
  • Dimensions 120 x 20 x 2.0 mm fit tight spaces

商品規格

BrandThermal Grizzly
ModelTG-MP-P-120-20-20-2
Part NumberTG-MP-P-120-20-20-2
FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the Basic, Advance, and Pro series. The Basic pads are easy to use, provide good thermal conductivity, slightly lower compressibility, and offer an excellent price-performance Ratio.

商品問答

What size SSD or GPU cooler will the 120 x 20 mm pad cover?

The pad measures 120 mm by 20 mm, so it fits M.2 2280 SSDs and narrow GPU memory rows; trim it with scissors if the target area is smaller.

Can I stack this 2.0 mm pad on an older 1 mm pad to fill a larger gap?

Stacking pads adds thermal resistance; replace the original material with a single 2.0 mm Minus Pad Pro layer for best conductivity.

How do I confirm the pad is making full contact after installation?

Remove the cooler and check for an even grey imprint across the component surface — no bare spots means the compressibility has closed the gap.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。