We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rackmount network switch with 24 RJ45 ports and 2 SFP+ ports

Ubiquiti Networks

Ubiquiti Networks USW-Enterprise-24-PoE (400W) network switch

SKU CH-6EYD-Y1W3W MPN USW-Enterprise-24-PoE (400W)

A 24-port managed Layer 3 switch with twelve 2.5 GbE and twelve GbE PoE+ ports, two 10G SFP+ uplinks, 62 Gbps throughput and a 400 W PoE budget

  • FormatRackmount
  • Network Management TypeManaged
  • Primary Ports24 x RJ45 + 2 x SFP+
  • Primary Port SpeedTotal non-blocking throughput 62 Gbps Switching capacity 124
  • Primary Port Type(12) GbE RJ45 ports (12) 2.5 GbE RJ45 ports (2) 10G SFP+ por
  • Management InterfaceEthernet In-Band

Model Enterprise 24 PoE

Struck-through versions exist but are not stocked here.

  • Full Layer 3 routing with static routes and ACLs
  • 24 PoE+ ports delivering up to 400 W total power
  • 12 ports at 2.5 GbE plus 12 at GbE
  • 2×10 GbE SFP+ uplinks for high-speed aggregation
  • 124 Gbps switching capacity with 92.25 Mpps forwarding

Enterprise PoE Switch for Managed Networks

The Ubiquiti USW-Enterprise-24-PoE is a rackmount managed switch with 24 RJ45 ports and two 10G SFP+ uplinks. Twelve ports run at 2.5 GbE and twelve at GbE, all supporting PoE+ with a 400W total power budget. It provides full Layer 3 routing, VLANs and ACLs for network segmentation.

Suited for PoE-Heavy Deployments.

This switch fits installations powering many wireless access points, IP cameras or VoIP phones from a single rack unit. The 400W budget covers dense PoE+ loads. Buyers who need only fibre uplinks or higher port counts without PoE should look at a different form factor.

Deciding Spec: 400W PoE Budget Across 24 Ports

The 400W limit determines how many 2.5 GbE PoE+ devices can run simultaneously at full power. Calculate the per-device draw before committing; if the aggregate exceeds 400W, devices will not receive sufficient power.

Highlights

  • Full Layer 3 routing with static routes and ACLs
  • 24 PoE+ ports delivering up to 400 W total power
  • 12 ports at 2.5 GbE plus 12 at GbE
  • 2×10 GbE SFP+ uplinks for high-speed aggregation
  • 124 Gbps switching capacity with 92.25 Mpps forwarding

Specifications

BrandUbiquiti Networks
SeriesNetwork Switch
ModelUSW-Enterprise-24-PoE (400W)
FormatRackmount
Network Management TypeManaged
Primary Ports24 x RJ45 + 2 x SFP+
Primary Port SpeedTotal non-blocking throughput 62 Gbps
Switching capacity 124 Gbps
Forwarding rate 92.25 Mpps
Primary Port Type(12) GbE RJ45 ports
(12) 2.5 GbE RJ45 ports
(2) 10G SFP+ ports
Management InterfaceEthernet In-Band
VLAN SupportYes
Jumbo FramesYes
PoEYes
LayerFull Layer 3
Layer 2 FeaturesIGMP snooping
STP / RSTP with priorities and port-level disable
Port isolation
Storm control
Voice VLAN
Port mirroring
LACP port aggregation
Multicast / broadcast rate limiting
MAC address blocking
Flow control
802.1X control
Jumbo frames
Proprietary loop protection
DHCP snooping / guarding
Egress rate limit
LLDP-MED
Port restricted by MAC
Device isolation with ACLs
Layer 3 FeaturesDHCP for locally-managed networks
DHCP relay
Inter-VLAN routing between networks on same switch
Static routing between local networks
Network isolation with ACLs
LEDsSystem Status
Ethernet Link/activity
SFP+ Link/activity
ButtonFactory reset
PoE Ports(24) PoE/PoE+ (Pins 1, 2+; 3, 6-)
PoE Power Budget400W
PowerPower method (1) Universal input, 100—240V AC, 8.5A Max., 50/60 Hz
(1) USP-RPS DC input: 52V DC, 7.7A; 11.5V DC, 8.7A
Power supply AC/DC, internal, 550W
Max Power Consumption60W (Excluding PoE output)
Dimensions442 x 325 x 44 mm (17.4 x 12.8 x 1.7")
WeightWithout mounting brackets: 5.1 kg (11.3 lb)
With mounting brackets: 5.2 kg (11.5 lb)
CertificationCE, FCC, IC
System RequirementUnifi Network Version 5.14.12 and later
Temperature-5 to 40° C (23 to 104° F)
Humidity10 to 95% noncondensing
Shipping weight6.33 kg
Package size508 × 432 × 122 mm

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What rack space and power circuit does the USW-Enterprise-24-PoE need?

The switch is a rackmount unit that runs on a universal 100—240V AC supply drawing up to 8.5A, and it also accepts a 52V DC USP-RPS backup input at 7.7A or 11.5V DC at 8.7A.

How is the switch first connected for management, and what step is often missed?

Management is Ethernet in-band, so you must plug a cable into one of the 24 RJ45 ports and adopt the device in the UniFi controller before VLANs or routing will pass traffic.

When will the internal 550W power supply or PoE budget need attention?

The 550W AC supply is internal and not user-replaceable; if total PoE draw approaches the 400W budget you must add a USP-RPS DC source or reduce connected devices.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.