Ubiquiti Networks USW-Enterprise-48-PoE (720W) network switch
- Rackmount
- Managed
Ubiquiti Networks
A 24-port managed Layer 3 switch with twelve 2.5 GbE and twelve GbE PoE+ ports, two 10G SFP+ uplinks, 62 Gbps throughput and a 400 W PoE budget
Model Enterprise 24 PoE
被劃上刪除線的選項確實存在,但本站並無供貨。
The Ubiquiti USW-Enterprise-24-PoE is a rackmount managed switch with 24 RJ45 ports and two 10G SFP+ uplinks. Twelve ports run at 2.5 GbE and twelve at GbE, all supporting PoE+ with a 400W total power budget. It provides full Layer 3 routing, VLANs and ACLs for network segmentation.
This switch fits installations powering many wireless access points, IP cameras or VoIP phones from a single rack unit. The 400W budget covers dense PoE+ loads. Buyers who need only fibre uplinks or higher port counts without PoE should look at a different form factor.
The 400W limit determines how many 2.5 GbE PoE+ devices can run simultaneously at full power. Calculate the per-device draw before committing; if the aggregate exceeds 400W, devices will not receive sufficient power.
| Brand | Ubiquiti Networks |
|---|---|
| Series | Network Switch |
| Model | USW-Enterprise-24-PoE (400W) |
| Format | Rackmount |
| Network Management Type | Managed |
| Primary Ports | 24 x RJ45 + 2 x SFP+ |
| Primary Port Speed | Total non-blocking throughput 62 Gbps Switching capacity 124 Gbps Forwarding rate 92.25 Mpps |
| Primary Port Type | (12) GbE RJ45 ports (12) 2.5 GbE RJ45 ports (2) 10G SFP+ ports |
| Management Interface | Ethernet In-Band |
| VLAN Support | Yes |
| Jumbo Frames | Yes |
| PoE | Yes |
| Layer | Full Layer 3 |
| Layer 2 Features | IGMP snooping STP / RSTP with priorities and port-level disable Port isolation Storm control Voice VLAN Port mirroring LACP port aggregation Multicast / broadcast rate limiting MAC address blocking Flow control 802.1X control Jumbo frames Proprietary loop protection DHCP snooping / guarding Egress rate limit LLDP-MED Port restricted by MAC Device isolation with ACLs |
| Layer 3 Features | DHCP for locally-managed networks DHCP relay Inter-VLAN routing between networks on same switch Static routing between local networks Network isolation with ACLs |
| LEDs | System Status Ethernet Link/activity SFP+ Link/activity |
| Button | Factory reset |
| PoE Ports | (24) PoE/PoE+ (Pins 1, 2+; 3, 6-) |
| PoE Power Budget | 400W |
| Power | Power method (1) Universal input, 100—240V AC, 8.5A Max., 50/60 Hz (1) USP-RPS DC input: 52V DC, 7.7A; 11.5V DC, 8.7A Power supply AC/DC, internal, 550W |
| Max Power Consumption | 60W (Excluding PoE output) |
| Dimensions | 442 x 325 x 44 mm (17.4 x 12.8 x 1.7") |
| Weight | Without mounting brackets: 5.1 kg (11.3 lb) With mounting brackets: 5.2 kg (11.5 lb) |
| Certification | CE, FCC, IC |
| System Requirement | Unifi Network Version 5.14.12 and later |
| Temperature | -5 to 40° C (23 to 104° F) |
| Humidity | 10 to 95% noncondensing |
| 出貨重量 | 6.33 kg |
| 包裝尺寸 | 508 × 432 × 122 mm |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
The switch is a rackmount unit that runs on a universal 100—240V AC supply drawing up to 8.5A, and it also accepts a 52V DC USP-RPS backup input at 7.7A or 11.5V DC at 8.7A.
Management is Ethernet in-band, so you must plug a cable into one of the 24 RJ45 ports and adopt the device in the UniFi controller before VLANs or routing will pass traffic.
The 550W AC supply is internal and not user-replaceable; if total PoE draw approaches the 400W budget you must add a USP-RPS DC source or reduce connected devices.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?