Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR4 2933MHz PC4-23400 2Rx8 CL21 1.2V 288-Pin UDIMM memory upgrade

SKU CH-TAFB-HSZSR

32GB DDR4 2933MHz PC4-23400 UDIMM built with major OEM chips and validated for Supermicro X12SAE and X12SCA-F motherboards

  • Capacity32GB
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Size 32GB

  • Exact-match 32 GB DDR4-2933 module installs at rated speed
  • Verified fit for Supermicro X12SAE / X12SCA-F motherboards
  • Major OEM chips from Samsung, Micron or Hynix tested for stability
  • 2Rx8 non-ECC unbuffered design matches board memory-population rules
  • Lifetime replacement warranty with free US-based technical support

Exact-match DDR4 upgrade

This 32GB DDR4-2933 module delivers the precise rank, voltage, and timing your Supermicro X12SAE or X12SCA-F memory controller expects. It installs as a standard 288-pin UDIMM and is recognised at full capacity without manual configuration. Builders needing ECC, registered DIMMs, or SODIMM form factors should look elsewhere.

Thermals and power

Operating at 1.2V without a heat spreader, the module runs cool under normal desktop workloads and draws minimal power from the memory rail. The unbuffered design adds no active components that could generate extra noise or heat. Systems with restricted airflow around the DIMM slots will not see thermal issues from this part.

CL21 timing at 2933 MT/s

CAS latency 21 at DDR4-2933 (PC4-23400) is the single spec that determines whether this kit matches your board's qualified-vendor list. The 2Rx8 organisation and 1.20V operation must align exactly with the motherboard's supported population rules for stable operation at rated speed.

Pontos fortes

  • Exact-match 32 GB DDR4-2933 module installs at rated speed
  • Verified fit for Supermicro X12SAE / X12SCA-F motherboards
  • Major OEM chips from Samsung, Micron or Hynix tested for stability
  • 2Rx8 non-ECC unbuffered design matches board memory-population rules
  • Lifetime replacement warranty with free US-based technical support

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-328K1
Capacity32GB
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB DDR4 2933MHz PC4-23400 2Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

How do I install this 288-pin DDR4 UDIMM in my Supermicro X12SAE motherboard and what step is often missed?

Align the notch on the module with the slot key, press straight down until both side clips click, then verify the DIMM population order in the motherboard manual so the 2Rx8 rank is recognised at full 32GB capacity.

What maintenance or replacement will this non-ECC UDIMM need over time?

No scheduled maintenance is required; the module has no heat spreader and uses major OEM chips rated for 1.20V operation, so replacement is only necessary if a memory test reports errors.

What limit appears first when this CL21 2933MHz kit runs sustained workloads?

The CAS latency of 21 cycles at DDR4-2933 sets the timing ceiling, and the fixed 1.20V voltage prevents further frequency scaling under prolonged load.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.