NEMIX RAM 16GB (2x8GB) DDR4-2933 ECC UDIMM CL21 1.2V 1Rx8 memory upgrade
- 16GB (2 x 8GB)
- 288-Pin DDR4 ECC UD…
NEMIX RAM
32GB DDR4 2933MHz PC4-23400 UDIMM built with major OEM chips and validated for Supermicro X12SAE and X12SCA-F motherboards
Size 32GB
This 32GB DDR4-2933 module delivers the precise rank, voltage, and timing your Supermicro X12SAE or X12SCA-F memory controller expects. It installs as a standard 288-pin UDIMM and is recognised at full capacity without manual configuration. Builders needing ECC, registered DIMMs, or SODIMM form factors should look elsewhere.
Operating at 1.2V without a heat spreader, the module runs cool under normal desktop workloads and draws minimal power from the memory rail. The unbuffered design adds no active components that could generate extra noise or heat. Systems with restricted airflow around the DIMM slots will not see thermal issues from this part.
CAS latency 21 at DDR4-2933 (PC4-23400) is the single spec that determines whether this kit matches your board's qualified-vendor list. The 2Rx8 organisation and 1.20V operation must align exactly with the motherboard's supported population rules for stable operation at rated speed.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR4 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD23400-328K1 |
| Capacity | 32GB |
| Type | 288-Pin DDR4 UDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB DDR4 2933MHz PC4-23400 2Rx8 1.2V 288-PIN Non-ECC UDIMM KIT |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
Align the notch on the module with the slot key, press straight down until both side clips click, then verify the DIMM population order in the motherboard manual so the 2Rx8 rank is recognised at full 32GB capacity.
No scheduled maintenance is required; the module has no heat spreader and uses major OEM chips rated for 1.20V operation, so replacement is only necessary if a memory test reports errors.
The CAS latency of 21 cycles at DDR4-2933 sets the timing ceiling, and the fixed 1.20V voltage prevents further frequency scaling under prolonged load.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?