NEMIX RAM 16GB (2x8GB) DDR4-2933 ECC UDIMM CL21 1.2V 1Rx8 memory upgrade
- 16GB (2 x 8GB)
- 288-Pin DDR4 ECC UD…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
32GB DDR4 2933MHz PC4-23400 UDIMM built with major OEM chips and validated for Supermicro X12SAE and X12SCA-F motherboards
Size 32GB
This 32GB DDR4-2933 module delivers the precise rank, voltage, and timing your Supermicro X12SAE or X12SCA-F memory controller expects. It installs as a standard 288-pin UDIMM and is recognised at full capacity without manual configuration. Builders needing ECC, registered DIMMs, or SODIMM form factors should look elsewhere.
Operating at 1.2V without a heat spreader, the module runs cool under normal desktop workloads and draws minimal power from the memory rail. The unbuffered design adds no active components that could generate extra noise or heat. Systems with restricted airflow around the DIMM slots will not see thermal issues from this part.
CAS latency 21 at DDR4-2933 (PC4-23400) is the single spec that determines whether this kit matches your board's qualified-vendor list. The 2Rx8 organisation and 1.20V operation must align exactly with the motherboard's supported population rules for stable operation at rated speed.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR4 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD23400-328K1 |
| Capacity | 32GB |
| Type | 288-Pin DDR4 UDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB DDR4 2933MHz PC4-23400 2Rx8 1.2V 288-PIN Non-ECC UDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Align the notch on the module with the slot key, press straight down until both side clips click, then verify the DIMM population order in the motherboard manual so the 2Rx8 rank is recognised at full 32GB capacity.
No scheduled maintenance is required; the module has no heat spreader and uses major OEM chips rated for 1.20V operation, so replacement is only necessary if a memory test reports errors.
The CAS latency of 21 cycles at DDR4-2933 sets the timing ceiling, and the fixed 1.20V voltage prevents further frequency scaling under prolonged load.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?