Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Two bare green DDR5 RDIMM sticks, 288-pin, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 256GB (2×128GB) 4800MHz ECC RDIMM Supermicro H13DSG-O-CPU

SKU CH-H2FA-7K4JT

A 256 GB DDR5 registered ECC kit of two 128 GB modules at 4800 MHz, CL40 and 1.1 V, validated for the Supermicro H13DSG-O-CPU motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

Ver as outras 30 configurações
  • 256 GB kit enables maximum server capacity
  • DDR5 4800 speed matches controller specification exactly
  • Registered ECC architecture prevents silent data corruption
  • 2Rx4 1.1 V modules fit Supermicro H13DSG-O-CPU slots
  • Lifetime replacement warranty covers the full kit

Server-grade DDR5 kit for Supermicro H13DSG-O-CPU

This 256 GB kit (2 x 128 GB) uses DDR5-4800 (PC5-38400) registered ECC RDIMMs built to the exact rank, voltage and timing the motherboard expects. It is intended for administrators who need the full 256 GB capacity recognised at rated speed without manual tuning.

Registered ECC limits and DDR5-4800 timing

The 2Rx4 registered architecture offloads the memory controller so every slot runs fully populated, while ECC corrects single-bit errors on the fly. CL40 latency and 1.1 V operation are fixed by the DDR5-4800 standard; the modules will not negotiate higher frequencies or lower latencies on this platform.

Bare-module build and 288-pin RDIMM fitment

No heat spreaders are fitted, so airflow in dense server chassis is unrestricted. The 288-pin RDIMM form factor matches the board's keying exactly — UDIMM or SODIMM modules cannot be installed. Verify the manual's population order before seating both DIMMs.

Pontos fortes

  • 256 GB kit enables maximum server capacity
  • DDR5 4800 speed matches controller specification exactly
  • Registered ECC architecture prevents silent data corruption
  • 2Rx4 1.1 V modules fit Supermicro H13DSG-O-CPU slots
  • Lifetime replacement warranty covers the full kit

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Should I choose the 256GB kit with two 128GB modules or a different capacity for my Supermicro H13DSG-O-CPU?

The 256GB kit provides two 128GB RDIMMs, matching the board's 288-pin DDR5 registered slots and 2Rx4 rank structure. Check your motherboard manual for approved population order and maximum supported capacity per slot before purchasing.

What does the 4800MHz speed mean once installed in the server?

The modules run at DDR5-4800 (PC5-38400) with CL40 latency at 1.1V. The registered buffer lets every slot operate at this rated speed when fully populated, while ECC corrects single-bit errors to prevent silent data corruption.

How does the 288-pin RDIMM interface limit what I can install?

This kit uses 288-pin DDR5 RDIMM form factor with registered buffering and ECC. It will not fit UDIMM or SODIMM slots, and the motherboard must support registered DIMMs with 2Rx4 organization at 1.1V for correct operation.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.