NEMIX RAM DDR5 5600 256GB 8x32GB CL46 1.1V 2Rx8 ECC RDIMM Supermicro H14DSG-OD memory upgrade
- 256GB (8 x 32GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM
A 256 GB DDR5 registered ECC kit of two 128 GB modules at 4800 MHz, CL40 and 1.1 V, validated for the Supermicro H13DSG-O-CPU motherboard
Size 256GB 2X128GB
This 256 GB kit (2 x 128 GB) uses DDR5-4800 (PC5-38400) registered ECC RDIMMs built to the exact rank, voltage and timing the motherboard expects. It is intended for administrators who need the full 256 GB capacity recognised at rated speed without manual tuning.
The 2Rx4 registered architecture offloads the memory controller so every slot runs fully populated, while ECC corrects single-bit errors on the fly. CL40 latency and 1.1 V operation are fixed by the DDR5-4800 standard; the modules will not negotiate higher frequencies or lower latencies on this platform.
No heat spreaders are fitted, so airflow in dense server chassis is unrestricted. The 288-pin RDIMM form factor matches the board's keying exactly — UDIMM or SODIMM modules cannot be installed. Verify the manual's population order before seating both DIMMs.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR38400-724K2 |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 2X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
The 256GB kit provides two 128GB RDIMMs, matching the board's 288-pin DDR5 registered slots and 2Rx4 rank structure. Check your motherboard manual for approved population order and maximum supported capacity per slot before purchasing.
The modules run at DDR5-4800 (PC5-38400) with CL40 latency at 1.1V. The registered buffer lets every slot operate at this rated speed when fully populated, while ECC corrects single-bit errors to prevent silent data corruption.
This kit uses 288-pin DDR5 RDIMM form factor with registered buffering and ECC. It will not fit UDIMM or SODIMM slots, and the motherboard must support registered DIMMs with 2Rx4 organization at 1.1V for correct operation.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?