Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão

RIMLANCE

RIMLANCE RUD12800LD8C2K8 8GB (2x4GB) DDR3 1600 CL11 1.35V Desktop RAM

SKU CH-1BPH-FMEZD

A dual-channel kit of two 4 GB DDR3 UDIMMs running at 1600 MHz with CL11 latency at 1.35 V

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor Brand Chipset
  • 8GB dual-channel kit boosts multitasking headroom with two 4GB modules
  • 1600MHz DDR3 speed delivers responsive throughput for everyday workloads
  • CL11 latency keeps data access snappy during heavy use
  • 35V low-voltage operation reduces power draw and heat
  • 240-pin unbuffered non-ECC DIMMs install straight into standard desktop slots

Ready-to-install DDR3 kit

This RIMLANCE kit supplies two unbuffered 4 GB DIMMs for a total of 8 GB. The modules are standard 240-pin desktop UDIMMs built with major-brand chips. They are designed for straightforward upgrades on DDR3 platforms. No ECC or registered buffering is present.

1600 MHz CL11 at 1.35 V

The memory runs at a data rate of 1600 MHz, labelled PC3-12800, with a CAS latency of 11. Operation is specified at 1.35 volts, lower than the traditional 1.5 V DDR3 standard. This combination of speed, timing and voltage is the key compatibility check for the target system.

Low-voltage thermals and quiet operation

Because the kit operates at 1.35 V, power draw and heat output are reduced compared with standard-voltage DDR3. The modules use passive cooling only, so they add no fan noise to the build. Typical desktop workloads keep temperatures well within normal DDR3 limits.

Pontos fortes

  • 8GB dual-channel kit boosts multitasking headroom with two 4GB modules
  • 1600MHz DDR3 speed delivers responsive throughput for everyday workloads
  • CL11 latency keeps data access snappy during heavy use
  • 35V low-voltage operation reduces power draw and heat
  • 240-pin unbuffered non-ECC DIMMs install straight into standard desktop slots

Especificações

BrandRIMLANCE
ModelRUD12800LD8C2K8
Capacity8GB (2 x 4GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset

Perguntas sobre este artigo

Will this kit work in a motherboard that only accepts 1.5 V DDR3 modules?

The modules are rated for 1.35 V operation; a board limited to 1.5 V may not boot or may run them out of spec.

My board has four DIMM slots — can I add this kit alongside two existing 4 GB sticks?

Yes, the two 4 GB modules fill two slots and leave the other two free for your current memory.

What does the CL11 figure mean for everyday use?

It is the CAS latency in clock cycles; lower numbers give slightly quicker response, and CL11 is standard for 1600 MHz DDR3.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.