BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
RIMLANCE
A dual-channel kit of two 4 GB DDR3 UDIMMs running at 1600 MHz with CL11 latency at 1.35 V
This RIMLANCE kit supplies two unbuffered 4 GB DIMMs for a total of 8 GB. The modules are standard 240-pin desktop UDIMMs built with major-brand chips. They are designed for straightforward upgrades on DDR3 platforms. No ECC or registered buffering is present.
The memory runs at a data rate of 1600 MHz, labelled PC3-12800, with a CAS latency of 11. Operation is specified at 1.35 volts, lower than the traditional 1.5 V DDR3 standard. This combination of speed, timing and voltage is the key compatibility check for the target system.
Because the kit operates at 1.35 V, power draw and heat output are reduced compared with standard-voltage DDR3. The modules use passive cooling only, so they add no fan noise to the build. Typical desktop workloads keep temperatures well within normal DDR3 limits.
| Brand | RIMLANCE |
|---|---|
| Model | RUD12800LD8C2K8 |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
The modules are rated for 1.35 V operation; a board limited to 1.5 V may not boot or may run them out of spec.
Yes, the two 4 GB modules fill two slots and leave the other two free for your current memory.
It is the CAS latency in clock cycles; lower numbers give slightly quicker response, and CL11 is standard for 1600 MHz DDR3.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?