OWC 32GB (4x8GB) DDR3 1866 CL13 ECC Registered RDIMM server RAM
- 32GB (4 x 8GB)
- 240-Pin DDR3 ECC RD…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
OWC
32 GB DDR3L 1600 ECC registered RDIMM kit (4 × 8 GB) for Cisco UCS C200 M2 and C210 M2 servers
Capacity 32GB (4 x 8GB)
This OWC kit supplies 32GB of DDR3L memory across four 8GB registered DIMMs. It is built for Cisco UCS C200 M2 and C210 M2 servers that require ECC registered modules. The kit will not work in standard desktop computers or alongside unbuffered or load-reduced memory.
Each module operates at 1.35V, the standard DDR3L voltage, which reduces power draw compared with 1.5V DDR3. No heat spreaders are fitted, so airflow through the server chassis handles cooling. Registered buffering adds minimal electrical load on the memory controller.
ECC registered operation corrects single-bit errors during continuous workloads, helping maintain data integrity in virtualisation or database tasks. CL11 latency at 1600MHz provides consistent timing for long-running server applications. The four-module population fills four slots for balanced channel utilisation.
| Brand | OWC |
|---|---|
| Part Number | 1R6T32R4032S |
| Capacity | 32GB (4 x 8GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Cisco UCS C200 M2 Cisco UCS C210 M2 |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
Power down the server, open the chassis, align each 240-pin module with the DDR3L slot key, press firmly until both retention clips lock, then verify in BIOS that all 32GB (4×8GB) are detected at 1600 MHz CL11; the step often missed is confirming the registered ECC mode is enabled.
No routine maintenance is required; if a module fails, replace the faulty 8GB 2Rx4 RDIMM with an identical DDR3L 1600 CL11 1.35V registered ECC part to keep matched ranks across the four slots.
The memory controller’s maximum supported frequency of 1600 MHz and the registered buffer’s timing at CL11 set the throughput ceiling; thermal throttling is unlikely at the standard 1.35V operating voltage.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม