暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

OWC

OWC 32GB (4x8GB) DDR3L 1600 PC3L-12800 CL11 2Rx4 240-pin 1.35V ECC Registered RDIMM Cisco UCS C200 M2 C210 M2

SKU CH-C56M-Y52ZP

32 GB DDR3L 1600 ECC registered RDIMM kit (4 × 8 GB) for Cisco UCS C200 M2 and C210 M2 servers

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • ECC registered design protects data integrity in servers
  • 32 GB kit with four 8 GB modules expands capacity
  • DDR3L 1600 CL11 at 1.35 V lowers power draw
  • 240-pin RDIMM fits Cisco UCS C200 M2 and C210 M2
  • Replaces Cisco part numbers UCSMR1X082RYA UCSMR2X082RYB UCSMR2X082RYE

Server Memory Kit

This OWC kit supplies 32GB of DDR3L memory across four 8GB registered DIMMs. It is built for Cisco UCS C200 M2 and C210 M2 servers that require ECC registered modules. The kit will not work in standard desktop computers or alongside unbuffered or load-reduced memory.

Thermals and Power

Each module operates at 1.35V, the standard DDR3L voltage, which reduces power draw compared with 1.5V DDR3. No heat spreaders are fitted, so airflow through the server chassis handles cooling. Registered buffering adds minimal electrical load on the memory controller.

Sustained Load Behaviour

ECC registered operation corrects single-bit errors during continuous workloads, helping maintain data integrity in virtualisation or database tasks. CL11 latency at 1600MHz provides consistent timing for long-running server applications. The four-module population fills four slots for balanced channel utilisation.

特長

  • ECC registered design protects data integrity in servers
  • 32 GB kit with four 8 GB modules expands capacity
  • DDR3L 1600 CL11 at 1.35 V lowers power draw
  • 240-pin RDIMM fits Cisco UCS C200 M2 and C210 M2
  • Replaces Cisco part numbers UCSMR1X082RYA UCSMR2X082RYB UCSMR2X082RYE

仕様

BrandOWC
Part Number1R6T32R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemCisco UCS C200 M2
Cisco UCS C210 M2

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install these 240-pin DDR3L ECC Registered RDIMMs in a Cisco UCS C200 M2 or C210 M2, and what step is often missed?

Power down the server, open the chassis, align each 240-pin module with the DDR3L slot key, press firmly until both retention clips lock, then verify in BIOS that all 32GB (4×8GB) are detected at 1600 MHz CL11; the step often missed is confirming the registered ECC mode is enabled.

What maintenance or replacement will this 32GB DDR3L 1600 kit need over its service life?

No routine maintenance is required; if a module fails, replace the faulty 8GB 2Rx4 RDIMM with an identical DDR3L 1600 CL11 1.35V registered ECC part to keep matched ranks across the four slots.

What limit appears first when these 1.35V DDR3L 1600 RDIMMs run sustained workloads in a Cisco UCS C200 M2 or C210 M2?

The memory controller’s maximum supported frequency of 1600 MHz and the registered buffer’s timing at CL11 set the throughput ceiling; thermal throttling is unlikely at the standard 1.35V operating voltage.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。