我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

A-Tech

A-Tech 8GB (2x4GB) DDR4 2133 ECC RDIMM 1Rx8 CL15 1.2V server RAM

SKU CH-B6W0-C3MDW

An 8 GB dual-channel DDR4 2133 ECC registered DIMM kit for servers and workstations

  • Capacity8GB (2 x 4GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes

Capacity 8GB (2 x 4GB)

  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity on multi-module servers
  • Single-rank 1Rx8 layout enables higher-density configurations
  • DDR4 2133 speed with CL15 latency delivers responsive throughput
  • Dual-channel 2×4 GB kit doubles bandwidth over single modules

Server DDR4 kit for ECC workloads

This 8 GB kit contains two 4 GB registered DIMMs built for DDR4 servers and workstations that require error-correcting memory. Each module is a single-rank 1Rx8 design running at 2133 MHz with CL15 latency. The kit is not compatible with desktop or laptop platforms.

Sustained operation with registered buffering

The registered buffer reduces electrical load on the memory controller, helping stability during continuous multi-threaded workloads. ECC circuitry detects and corrects single-bit errors without halting the system. Standard 1.2 V operation keeps power draw predictable under load.

288-pin DDR4 ECC RDIMM form factor

Only systems that accept DDR4 288-pin registered ECC modules can use this kit. Buyers whose motherboards require unbuffered UDIMMs or a different DDR generation cannot install these modules.

商品特色

  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity on multi-module servers
  • Single-rank 1Rx8 layout enables higher-density configurations
  • DDR4 2133 speed with CL15 latency delivers responsive throughput
  • Dual-channel 2×4 GB kit doubles bandwidth over single modules

商品規格

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 4GB 1Rx8 PC4-2133P-R
Part NumberAT4G2D4D2133RS8N12V
Capacity8GB (2 x 4GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips / Error Correcting Technology for Server Systems

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 1.2 V registered ECC modules add noticeable heat or fan noise when the server runs continuously?

The kit operates at the standard DDR4 voltage of 1.20 V and has no heat spreader, so thermal output stays within normal DDR4 limits for registered DIMMs.

My motherboard has 288-pin DDR4 slots — is anything else required for these RDIMMs to work?

You need a server or workstation platform that explicitly supports DDR4 ECC registered memory; desktop and laptop boards will not accept these modules.

Can I mix this 1Rx8 CL15 kit with existing single-rank DDR4 ECC RDIMMs of a different capacity?

Mixing ranks and capacities is possible only if the system manual approves the specific population rules for your server or workstation.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。