EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
8GB DDR3 1600MHz ECC RDIMM 2Rx4 server memory compatible with Dell A5681559, A5681561, A5816804, A5816812, A5816819 and SNPRYK18C/8G
This 8GB DDR3 1600MHz ECC registered DIMM is built for server and workstation systems that require registered memory with error correction. It operates at 1.5V with CL11 latency and uses a 2Rx4 rank configuration on a 240-pin module.
This module replaces Dell part numbers A5681559, A5681561, A5816804, A5816812, A5816819 and SNPRYK18C/8G, making it a direct fit for compatible Dell servers and workstations. Builders whose systems need unbuffered UDIMMs, non-ECC memory, or a different DDR generation should select another module.
The system must support DDR3 1600MHz registered ECC RDIMM memory at 1.5V; if the platform requires unbuffered, non-ECC, or a different speed, this module will not function.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at 1600 MHz with a PC3-12800 rating, so its peak transfer rate is 12800 MB/s. Actual throughput depends on the server's memory controller and channel configuration.
It needs a standard 240-pin DDR3 DIMM slot. The registered design adds a register chip on the PCB, so verify the motherboard supports registered memory and that heatsink clearance is adequate.
Power down, open the chassis, align the notch with the 240-pin slot, press firmly until both latches click. The step often missed is confirming the BIOS recognises the module as ECC registered at 1600 MHz.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?