EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
8GB DDR3 1866MHz ECC registered DIMM with CL13 latency and 1.5V operation for server workloads
This A-Tech module is an 8GB DDR3 1866MHz ECC Registered DIMM built for server and workstation systems. It uses a 1Rx4 configuration with Samsung chipset and operates at the standard 1.50V voltage. The 240-pin DIMM is a compatible replacement for the Samsung M392B1G70DB0-CMA part.
This memory fits systems that require DDR3 ECC Registered DIMMs with a 1Rx4 organisation. It will not work in desktop boards that accept only unbuffered non-ECC modules. Buyers needing higher capacities per slot or different rank configurations should verify their platform specifications first.
The single-rank by four-bit arrangement determines compatibility with specific server memory controllers. Systems requiring dual-rank modules or unbuffered ECC will not accept this DIMM. Confirm the 1Rx4 requirement in your hardware manual before ordering.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Samsung |
| Model | M392B1G70DB0-CMA |
| Capacity | 8GB |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Samsung Chipset |
| Features | M392B1G70DB0-CMA |
The module runs at 1866 MHz with CL13 timing at 1.5 V; the system memory controller will set a common speed for all populated slots.
Check the BIOS memory summary for 8 GB at 1866 MHz, ECC enabled and registered status, then run a memory diagnostic such as MemTest86.
The box contains the single 8 GB DDR3 1866 MHz ECC RDIMM module only; no cables, brackets or tools are included.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
No language matches that.
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?