我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

A-Tech

A-Tech 8GB DDR3L 1333 ECC RDIMM 2Rx4 server RAM

SKU CH-8KB1-CNMX7

8GB DDR3L 1333 ECC registered DIMM with 2Rx4 organisation and 1.35V low-voltage operation

  • Capacity8GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB DDR3L ECC RDIMM adds registered server memory capacity
  • 1333 MHz PC3L-10600 speed matches DDR3L 1333 system requirements
  • 35 V low voltage reduces power draw in compatible platforms
  • 2Rx4 dual-rank organisation with major-brand chips for registered DIMM stability
  • Replaces HP part numbers including 604506-S21 605313-071 647649-171 647650-07H 647875-B21 664690-001 687460-001 698889-001 731656-081 A0R58A

8GB DDR3L 1333 ECC RDIMM 2Rx4

This is an A-Tech 8GB DDR3L 1333MHz PC3L-10600 ECC Registered DIMM built with major brand chips. It operates at 1.35V low voltage with CL9 latency and a 2Rx4 rank configuration on a 240-pin form factor. The module is designed for server and workstation systems requiring registered error-correcting memory.

Suits HP part numbers listed

This memory replaces HP part numbers including A0R58A, 731656-081, 604506-S21, 664690-001, 698889-001, 647875-B21, 605313-071, 647649-171, 647650-07H and 687460-001. It is not suitable for systems that only accept unbuffered non-ECC UDIMMs. Builders needing different capacities, speeds or voltage specifications should verify their platform requirements before purchase.

Registered ECC with 2Rx4 organization

The single specification that decides fit is the registered ECC RDIMM design with 2Rx4 rank organization. Systems requiring unbuffered UDIMMs, different rank configurations such as 1Rx8 or 2Rx8, or standard 1.5V DDR3 voltage will not support this module. Confirm the motherboard manual specifies DDR3L 1333MHz registered ECC 2Rx4 support.

商品特色

  • 8GB DDR3L ECC RDIMM adds registered server memory capacity
  • 1333 MHz PC3L-10600 speed matches DDR3L 1333 system requirements
  • 35 V low voltage reduces power draw in compatible platforms
  • 2Rx4 dual-rank organisation with major-brand chips for registered DIMM stability
  • Replaces HP part numbers including 604506-S21 605313-071 647649-171 647650-07H 647875-B21 664690-001 687460-001 698889-001 731656-081 A0R58A

商品規格

BrandA-Tech
Capacity8GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

商品問答

Does this 1.35 V DDR3L 1333 RDIMM need a server motherboard that supports registered ECC memory?

Yes, the module is a registered ECC RDIMM and requires a server or workstation board with a DDR3L memory controller that accepts registered ECC DIMMs.

Can I mix this 2Rx4 DDR3L 1333 stick with older PC3-10600 non-ECC UDIMMs in the same system?

No, registered ECC RDIMMs cannot be mixed with unbuffered non-ECC UDIMMs; the memory controller must run all slots in registered ECC mode.

After installing the 240-pin module, how do I confirm it is running at DDR3L 1333 with ECC active?

Check the BIOS memory information or run a tool such as CPU-Z; it should show 1333 MHz, 1.35 V, CL9 timings and ECC enabled.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。