EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
8GB DDR4 2400MHz desktop memory module with 288-pin DIMM form factor and 1.2V operation
This single 8GB DDR4 module runs at 2400MHz with a standard 1.20V operating voltage. It uses the 288-pin DIMM form factor and is built as a non-ECC unbuffered unit. The stick is designed as a direct replacement for the Hynix HMA41GU6AFR8N-UH module in compatible desktop systems.
Swapping out lower-frequency DDR4 memory or filling an empty slot with this 2400MHz module can improve multitasking headroom and reduce load times. The upgrade is worthwhile when the motherboard and CPU memory controller officially support DDR4 2400 operation without downclocking to a lower speed.
The DDR4 2400 standard caps data transfer at the PC4-19200 rate, so this module cannot exceed that bandwidth regardless of tighter timings. Systems limited to lower DDR4 speeds will automatically downclock the stick, while platforms requiring registered or ECC memory cannot use this unbuffered non-ECC design at all.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
The module uses the standard 288-pin DDR4 DIMM form factor, which matches any desktop motherboard with DDR4 slots.
Align the notch with the slot key, press down firmly until both side clips click into place, and verify the module sits level; the step often missed is fully engaging both clips.
No firmware updates are required for memory modules; it is a passive component with no moving parts and does not need scheduled replacement under normal use.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?