我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Rectangular silver power supply unit 254.6mm by 251.6mm by 63mm weighing 3.6kg

AFRNDK

AFRNDK APW12 12V-15V 200-240V 45dBA 3.6kg mining hardware

SKU CH-E7P1-HDEHD

Bitmain-original APW12 PSU delivers 12–15 V DC at 200–240 V AC input for Antminer S19, S19 Pro and T19 rigs, running at 45 dBA and weighing 3.6 kg

Options APW12 PSU

顯示另外 2 款選項

被劃上刪除線的選項確實存在，但本站並無供貨。

  • Original Bitmain PSU keeps Antminer 19 series rigs running 24/7/365
  • 200-240 V AC input with 47-63 Hz range suits global mains power
  • 12-15 V DC primary rail at 12.2-12.4 V tolerance delivers stable miner voltage
  • 45 dBA acoustic rating limits noise in dense farm racks
  • 6 kg unit measuring 254.6 mm x 251.6 mm x 63 mm fits standard slots

AFRNDK APW12 power supply for 19-series miners

The AFRNDK APW12 is an original Bitmain power supply unit built for Antminer S19, S19 Pro and T19 models. It accepts 200-240V AC input at 47-63Hz and delivers a 12V-15V DC output with a 12.2V-12.4V rail. The unit measures 254.6mm x 251.6mm x 63mm and weighs 3.6 kg.

Suits operators running 19-series rigs continuously

This PSU matches the voltage and connector requirements of the listed Antminer 19 series units. Buyers with special S19 variants such as S19JL, S19JPEOL, S19JPRO-A, S19A, S19APRO or L7 should verify compatibility before purchase. It is not intended for other miner families or general PC builds.

Direct replacement install with spare-unit planning

Installation follows the standard Antminer PSU swap procedure; no special tools are described in the data. Acoustic output is rated at 45dBA. Keeping spare units on site is advised to avoid downtime during continuous 365-day operation.

商品特色

  • Original Bitmain PSU keeps Antminer 19 series rigs running 24/7/365
  • 200-240 V AC input with 47-63 Hz range suits global mains power
  • 12-15 V DC primary rail at 12.2-12.4 V tolerance delivers stable miner voltage
  • 45 dBA acoustic rating limits noise in dense farm racks
  • 6 kg unit measuring 254.6 mm x 251.6 mm x 63 mm fits standard slots

商品規格

本商品目前尚未公佈規格。

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What miner models does the APW12 12V-15V unit support?

The APW12 is built for Bitmain Antminer 19 series miners including S19, S19 Pro and T19.

Can the APW12 share a 200-240 V circuit with older miners?

Yes, it accepts 200-240 V input at 47-63 Hz, the same mains range used by many earlier Bitmain units.

How do I confirm the APW12 is delivering power correctly after install?

Listen for the 45 dBA fan noise and verify the miner reports stable 12.2-12.4 V on the hash boards.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。