我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Clear cylindrical POM plexi inline filter with stainless steel mesh and G1/4 threads

Alphacool

Alphacool Eiszapfen Filter G1/4 Inner Thread Plexi 20x25mm 1012586

SKU CH-NPZE-6NVWX

Inline G1/4 filter with stainless-steel micro-mesh protects micro-structure coolers from clogging while maintaining high flow rates

  • ColorClear
  • FeaturesA high flow, inline G1/4" fitting from Alphacool

Color Clear

  • Protects microstructure coolers from clogging with stainless steel fibre microfilter
  • Maintains high flow rate — 50% above 8 mm tube and 30% above 10 mm tube
  • Flow reduction only after 30–50% filter blockage
  • Compact 20 x 25 mm POM plexi body fits tight loops
  • Dual G1/4 inch inner threads for standard water-cooling fittings

Eiszapfen inline filter for G1/4 loops

The Alphacool Eiszapfen filter is a clear POM plexi component with a stainless steel fibre microfilter. It threads into any G1/4 inch port and measures 20 by 25 millimetres. The unit ships new as part number 1012586 and includes one filter in the box. It is built for custom liquid cooling circuits that need debris protection without restricting coolant movement.

Suited for microstructure blocks and high-flow loops

Builders running dense microchannel water blocks benefit because the mesh stops particles that would otherwise clog narrow passages. The design delivers flow around fifty percent higher than an eight millimetre inner diameter tube and thirty percent higher than a ten millimetre tube, so restrictive blocks stay fed. Buyers who need a filter for larger debris or who cannot accommodate the 20 by 25 millimetre envelope should look elsewhere.

Stainless steel fibre microfilter

The filter media adds no measurable resistance until it reaches thirty to fifty percent clogging, making it the decisive specification for loops that prioritise pump headroom. Two G1/4 inch inner threads allow straightforward inline placement anywhere in the circuit. The clear POM plexi body lets you inspect contamination visually without disassembly.

商品特色

  • Protects microstructure coolers from clogging with stainless steel fibre microfilter
  • Maintains high flow rate — 50% above 8 mm tube and 30% above 10 mm tube
  • Flow reduction only after 30–50% filter blockage
  • Compact 20 x 25 mm POM plexi body fits tight loops
  • Dual G1/4 inch inner threads for standard water-cooling fittings

商品規格

BrandAlphacool
Model1012586
ColorClear
FeaturesA high flow, inline G1/4" fitting from Alphacool

其他版本

同系列還有 3 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Should I pick the 20x25mm G1/4 filter or another size for my loop?

This model is a single 20x25mm inline filter with dual G1/4 inner threads. Choose it when your tubing and fittings use G1/4 threads and you need a compact filter that fits between standard water-block ports.

How much will the 50% higher flow claim actually help my pump and temperatures?

The stainless-steel microfilter flows roughly 50% better than an 8mm ID tube and 30% better than a 10mm ID tube. You will only see a measurable drop once the mesh reaches 30-50% blockage, keeping pump load low in normal use.

What does the G1/4 thread limit in terms of compatible fittings and tubing?

Both ends use G1/4 inner threads, so any standard G1/4 male fitting — rigid, soft-tube or compression — will connect directly. The thread itself does not restrict flow; the 25mm long filter body and microfilter mesh set the practical limit.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。