我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green DDR2 DIMMs with gold contacts and black chips

Computer Memory Solutions

Computer Memory Solutions CM512725300ECCREG2R4 16GB (4x4GB) DDR2 667 ECC Registered memory upgrade

SKU CH-Y10A-9R70K

A 16 GB registered ECC DDR2 kit of four 4 GB modules at 667 MHz for Supermicro X7Dcl-I, X7Dct, X7Dct-10G, X7Dct-3 and X7Dct-3F servers

  • Capacity16GB (4 x 4GB)
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Timing5-5-5
  • Voltage1.8V
  • 16 GB kit (4 × 4 GB) for server memory expansion
  • DDR2 667 MHz (PC2-5300) speed for compatible Supermicro platforms
  • ECC registered 240-pin DIMMs protect data integrity
  • CL5 5-5-5 timing at 1.8 V for stable operation
  • 2Rx4 organisation with 18 chips per module

Server DDR2 ECC Registered kit

This 16 GB kit contains four 4 GB DDR2 667 modules built for Supermicro X7Dcl-I, X7Dct, X7Dct-10G, X7Dct-3 and X7Dct-3F servers. Each stick is a 240-pin registered DIMM with ECC and a 2Rx4 organisation. The kit targets administrators who need to populate all slots on these platforms with validated memory.

Sustained load behaviour

Registered buffering and ECC correction keep data integrity steady during continuous server workloads. The CL5 5-5-5 timings and 1.8 V operation are maintained across all four modules without throttling. The major-brand chipset supports the rated PC2-5300 bandwidth throughout extended duty cycles.

Thermals, noise and power

Modules run at the standard DDR2 1.8 V with no heat spreader unless current inventory includes one. Power draw stays within the DDR2 specification for registered DIMMs. Passive cooling in a server chassis keeps temperatures in check and adds no audible noise.

商品特色

  • 16 GB kit (4 × 4 GB) for server memory expansion
  • DDR2 667 MHz (PC2-5300) speed for compatible Supermicro platforms
  • ECC registered 240-pin DIMMs protect data integrity
  • CL5 5-5-5 timing at 1.8 V for stable operation
  • 2Rx4 organisation with 18 chips per module

商品規格

BrandComputer Memory Solutions
ModelCM512725300ECCREG2R4
Capacity16GB (4 x 4GB)
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Timing5-5-5
Voltage1.8V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemSupermicro X7Dcl-I X7Dct X7Dct-10G X7Dct-3, X7Dct-3F
Package Content1 Memory RAM Stick

商品問答

How much heat and power will the 1.8 V DDR2 667 registered DIMMs add when the server runs all day?

Each module operates at 1.8 V with a CL5 5-5-5 timing; registered buffering reduces electrical load on the memory controller, keeping power draw and heat modest for continuous server operation.

What must the system already provide for these four 240-pin DIMMs to function?

A Supermicro X7Dcl-I, X7Dct, X7Dct-10G, X7Dct-3 or X7Dct-3F motherboard with four available 240-pin DDR2 slots that support ECC registered memory at PC2-5300 speed.

Will the 2Rx4 ECC registered kit work alongside older 512 MB or 1 GB DDR2 modules already installed in the same server?

The kit uses major-brand 18-chip 2Rx4 ICs at 667 MHz; mixing ranks or speeds can prevent the board from training, so populated slots should match this specification for stable operation.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。