我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black soft-tube water-cooling kit with three 1m tubes, ten compression fittings, two 90° elbows, a mini M2M adapter and a tube cutter

FormulaMod

FormulaMod Soft Tube Fitting Kit 10x13mm Black G1/4 Compression Combo

SKU CH-VMSB-4FT3W

Complete G1/4 water-cooling kit with three metres of 10x13mm soft tubing, ten compression fittings, two 90° elbows, a mini male-to-male joiner and a tube cutter

  • TypeCombo Kit
  • ColorBlack

Color Black

  • Complete water-cooling kit with tubing, fittings and cutter included
  • 10 mm inner and 13 mm outer diameter soft tubing for secure G1/4 compression seals
  • Three one-metre tubes, ten straight fittings, two 90° elbows and one mini M2M adapter supplied
  • Integrated tube cutter enables clean, square cuts for leak-free assembly
  • Compatible with new builds and upgrades using standard G1/4 threaded components

Complete Soft-Tube Kit for Custom Loops

This FormulaMod bundle supplies 10x13 mm soft tubing, ten G1/4 compression fittings, two 90° elbows, one mini male-to-male joiner and a dedicated tube cutter. Everything needed to assemble or refresh a water-cooling loop arrives in a single package. The kit suits both first-time builders and experienced modders updating an existing system.

Leak-Free Sealing With Standard G1/4 Threads

Compression fittings grip the 10x13 mm tube evenly around its circumference, creating a reliable seal on every G1/4 port without specialised tools. The included cutter produces clean, square ends that seat fully in each fitting, reducing the risk of coolant loss. No pump noise or thermal data apply because the kit contains no active components.

Pre-Cut Lengths and Angled Fittings Simplify Routing

Three one-metre tube sections let you trim exact runs for CPU blocks, radiators and reservoirs without waste. The 90° elbows enable tight bends around motherboard heatsinks or GPU back-plates where straight fittings would kink the tube. The mini joiner connects two fittings directly for compact bridge sections. No software, lighting or monitoring features are included.

商品特色

  • Complete water-cooling kit with tubing, fittings and cutter included
  • 10 mm inner and 13 mm outer diameter soft tubing for secure G1/4 compression seals
  • Three one-metre tubes, ten straight fittings, two 90° elbows and one mini M2M adapter supplied
  • Integrated tube cutter enables clean, square cuts for leak-free assembly
  • Compatible with new builds and upgrades using standard G1/4 threaded components

商品規格

TypeCombo Kit
ColorBlack

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I install the 10x13mm soft tubing onto the G1/4 compression fittings without leaks?

Cut the tube square with the included cutter, slide the compression nut and olive onto the tube, push the tube fully onto the fitting barb until it seats against the internal stop, then hand-tighten the nut plus a quarter turn with a spanner; the step most people miss is not pushing the tube past the olive far enough to hit the stop.

Which parts of this kit will need replacement after extended use?

The 10x13mm soft tubing can harden or discolour over time and should be inspected annually; the EPDM O-rings inside the 10 compression fittings, two 90° fittings and one mini M2M fitting may also lose elasticity and are the typical service items.

What is the first limit I will hit when running this loop continuously under load?

The 10x13mm tubing has a lower burst-pressure rating than hard tube, so sustained high coolant temperatures combined with pump pressure will reach the tube's pressure-temperature limit before the G1/4 compression fittings or 90° elbows become restrictive.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。