我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Rectangular silver metal power supply unit with ventilation grilles and rear connector panel

HP

HP J9306A#B2E 1500W Proprietary Power Supply

SKU CH-P80N-C1JYS MPN J9306A#B2E

A 1500 W proprietary power supply delivering 300 W PoE+ at 110-127 V AC, 900 W PoE+ at 200-240 V AC and 600 W for switch power

  • TypeProprietary Power Supply
  • Maximum Power1500 W
  • FeaturesInput Voltage:110 V AC 220 V AC Weight (Approximate):7.50 lb
  • Dimensions5.1" Height x 7.5" Width x 6.1" Depth
  • Delivers 1500 W total output for demanding network infrastructure
  • Provides 900 W PoE+ power at 200-240 V AC input
  • Supplies 300 W PoE+ power at 110-127 V AC input
  • Reserves 600 W for switch operation independent of PoE load
  • Compact 5.1" x 7.5" x 6.1" form factor fits standard zl chassis

Proprietary 1500W Power Supply for HP zl Switches

This proprietary 1500W power supply is built for HP zl series network switches. It delivers both switch operating power and PoE+ capacity in a single module. Network administrators use it to power access points, phones and cameras through the switch ports.

PoE+ Headroom at Two Voltage Ranges

At 110 to 127 volts the unit provides 300W for PoE+ devices, while at 200 to 240 volts it provides 900W for PoE+ devices. Switch operating power is rated at 600W across both ranges. PoE+ capacity therefore depends on the local mains voltage available.

Replaces Existing zl Supply When PoE+ Demand Grows

It replaces a lower-wattage zl power supply when the connected PoE+ load exceeds the original module’s budget. The upgrade is worth it when the deployment adds more powered devices or moves to a 200 to 240 volt supply to unlock the higher PoE+ ceiling.

商品特色

  • Delivers 1500 W total output for demanding network infrastructure
  • Provides 900 W PoE+ power at 200-240 V AC input
  • Supplies 300 W PoE+ power at 110-127 V AC input
  • Reserves 600 W for switch operation independent of PoE load
  • Compact 5.1" x 7.5" x 6.1" form factor fits standard zl chassis

商品規格

BrandHP
TypeProprietary Power Supply
Maximum Power1500 W
FeaturesInput Voltage:110 V AC
220 V AC
Weight (Approximate):7.50 lb
Input Voltage Type:AC
Dimensions5.1" Height x 7.5" Width x 6.1" Depth
出貨重量4.15 kg
包裝尺寸353 × 274 × 267 mm

商品問答

Will the J9306A#B2E power supply fit in my existing HP zl series switch chassis?

This unit is a proprietary power supply designed for HP zl series switches and measures 5.1" Height x 7.5" Width x 6.1" Depth, matching the zl power supply bay form factor.

How can I verify the J9306A#B2E is delivering the correct PoE+ power after installation?

The switch management interface reports real-time PoE consumption; at 110-127 V AC input you should see up to 300 W available for PoE+, and at 200-240 V AC up to 900 W for PoE+ alongside 600 W reserved for switch operation.

What comes with the J9306A#B2E and what must I source separately?

The power supply module itself is included; an AC power cord with the correct regional plug for 110 V AC or 220 V AC operation is not included and must be obtained separately.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。