我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Silver 2.5 inch SATA SSD with 7 mm thickness

Intel

Intel D3-S4610 1.92 TB SATA 2.5" 7 mm enterprise SSD

SKU CH-10F5-Z4JHT

A 1.92 TB SATA enterprise SSD with 560 MB/s read, 510 MB/s write, 97,000 random read IOPS and 46,500 random write IOPS in a 2.5" 7.0 mm form factor

  • Low latency with 36 us read and 37 us write
  • High random reads at 97,000 IOPS
  • Strong random writes at 46,500 IOPS
  • Fast sequential speeds up to 560 MB/s read and 510 MB/s write
  • Efficient power use with 3.0 W active and 1.0 W idle

1.92 TB SATA enterprise SSD

This Intel D3-S4610 drive provides 1.92 TB of capacity in a 2.5-inch 7.0 mm form factor. It uses 3D NAND TLC flash and connects via a SATA 6 Gb/s interface. The drive targets read-intensive server and storage array workloads.

Sustained random IOPS and latency

Random read performance reaches 97,000 IOPS while random write delivers 46,500 IOPS across the full span. Average latency sits at 36 µs for reads and 37 µs for writes. Active power draw is 3.0 W with an idle figure of 1.0 W.

SATA 6 Gb/s interface limits

Sequential throughput peaks at 560 MB/s read and 510 MB/s write, bounded by the SATA link. The drive fits servers and arrays that accept 2.5-inch 7 mm SATA devices. MTBF is rated at 2 million hours.

商品特色

  • Low latency with 36 us read and 37 us write
  • High random reads at 97,000 IOPS
  • Strong random writes at 46,500 IOPS
  • Fast sequential speeds up to 560 MB/s read and 510 MB/s write
  • Efficient power use with 3.0 W active and 1.0 W idle

商品規格

本商品目前尚未公佈規格。

商品問答

How much power does the Intel D3-S4610 draw when running continuously at 3.0 W active and 1.0 W idle?

Active power is 3.0 W and idle power is 1.0 W, so a full-day workload stays within that envelope with 36 µs read and 37 µs write latency.

What physical slot and cable does this 2.5 inch 7.0 mm SATA drive require?

It fits any 2.5 inch 7.0 mm SATA bay and connects with a standard SATA data and power cable.

Will the 1.92 TB TLC SATA drive work in a legacy RAID controller that only supports SATA 3 Gb/s?

The drive uses SATA 6 Gb/s but negotiates down to 3 Gb/s, delivering up to 560 MB/s sequential read and 510 MB/s sequential write at the lower link speed.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。