我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green rectangular circuit board with gold edge connector and black memory chips, no heat spreader

Kingston Technology Corp.

Kingston Technology Corp. KVR400/1GR 1GB DDR 400 (PC 3200) desktop RAM

SKU CH-5AN9-JBF4P MPN KVR400/1GR

1GB DDR 400 desktop memory with CL3 latency and 2.60V operation for PC 3200 systems

  • Capacity1GB
  • SpeedDDR 400 (PC 3200)
  • CAS LatencyCL3
  • Voltage2.60V
  • Heat SpreaderNo
  • 1GB capacity for basic desktop tasks
  • DDR 400 speed rated at PC 3200
  • CAS latency CL3 for standard timing
  • 60V operation within JEDEC spec
  • 100% tested through Advanced Validation Labs

Kingston ValueRAM 1GB DDR 400

This Kingston ValueRAM module provides 1GB of DDR 400 (PC 3200) desktop memory. It operates at CL3 latency with a 2.60V voltage and has no heat spreader. The module is 100% tested and complies with JEDEC specifications.

Suitable for legacy DDR systems

This memory suits builders repairing or upgrading older desktops that require DDR 400 modules. Systems needing higher capacity, lower voltage, or modern DDR generations cannot use this part.

DDR 400 (PC 3200) speed rating

The DDR 400 (PC 3200) speed rating is the single specification that determines compatibility. Your motherboard must support this exact speed and voltage for the module to function correctly.

商品特色

  • 1GB capacity for basic desktop tasks
  • DDR 400 speed rated at PC 3200
  • CAS latency CL3 for standard timing
  • 60V operation within JEDEC spec
  • 100% tested through Advanced Validation Labs

商品規格

BrandKingston
SeriesValueRAM
ModelKVR400/1GR
Capacity1GB
SpeedDDR 400 (PC 3200)
CAS LatencyCL3
Voltage2.60V
Heat SpreaderNo
出貨重量0.09 kg
包裝尺寸196 × 145 × 23 mm

商品問答

Will this 184-pin DIMM fit my DDR 400 desktop motherboard?

The module is a standard 184-pin DDR DIMM keyed for DDR 400 (PC 3200) slots. It requires a motherboard that accepts 2.60 V DDR memory and supports CL3 timing.

What is the correct way to seat this KVR400/1GR module, and which step do builders often miss?

Align the notch with the slot key, press straight down until both side clips snap shut, then verify the module sits flush. The missed step is checking that both clips are fully locked.

Does this ValueRAM stick need any firmware updates or thermal paste replacement over its life?

No firmware or thermal paste is involved. The module has no heat spreader and runs at the JEDEC 2.60 V spec. If errors appear later, reseat the DIMM or test with a memory diagnostic tool.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。