SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501587BTC
現貨
myVolts
myVolts 1800W 2U Modular Mining PSU 10x6Pin
Modular 1800 W AT power supply with ten 6-pin connectors and 95 % conversion efficiency
- TypeAT
- 1800W output powers up to 10 mining devices simultaneously
- 95% conversion efficiency lowers electricity costs versus typical passive PFC units
- 10 six-pin connectors eliminate adapter clutter for GPU rigs
- Automatic shutdown protects hardware during circuit faults or overheating
- 100–240V AC input works on global mains without switching
Mining power supply with ten 6-pin connectors
The myVolts 1800 W modular PSU delivers up to 1800 watts of 12 V DC power from a 110–230 V AC source. It uses a 95 % conversion rate to keep electricity costs lower than passive PFC designs. An aluminium shell and all-copper transformer windings help the unit run cooler and last longer. Automatic shutdown triggers if a circuit fault or excessive internal temperature is detected.
Suitable for GPU mining rigs that need ten 6-pin
Miners powering Antminer S9, L3+, Z9 Mini or D3 units can connect each hash board directly without extra splitters. The 60 mm high-speed fan moves plenty of air, but the noise level is noticeable during full-load operation. Builds requiring more than ten connectors or any 8-pin or 12VHPWR leads cannot use this PSU as-is. Server installations needing redundant hot-swap modules should look at a different form factor.
Ten 6-pin outputs on a single 12 V rail
Every connector draws from the same 1800 W 12 V rail, so total load must stay within that limit. The 120 cm AC cord reaches most rack PDUs without an extension. Input voltage auto-ranges from 100 to 240 V, making the unit usable worldwide. Efficiency stays at or above 95 % across the load range, reducing waste heat and operating cost.
商品特色
- 1800W output powers up to 10 mining devices simultaneously
- 95% conversion efficiency lowers electricity costs versus typical passive PFC units
- 10 six-pin connectors eliminate adapter clutter for GPU rigs
- Automatic shutdown protects hardware during circuit faults or overheating
- 100–240V AC input works on global mains without switching
商品規格
| Type | AT |
|---|
商品問答
Which capacity should I pick for an 8-GPU mining rig?
The unit delivers 1800W on the 12V rail, matching the spec for eight GPUs with ten 6-pin connectors included.
What does the 95% conversion rate mean once the PSU is installed?
It indicates 95% or higher AC-to-DC efficiency, so less power is lost as heat and electricity costs are lower than typical passive PFC designs.
What does the 110-230V AC input range cap in practice?
The PSU auto-ranges between 110V and 230V mains, allowing worldwide use without a voltage switch while feeding a steady 12V DC output.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
