我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green rectangular circuit board with silver components and screw terminals, 115 by 65 mm

myVolts

myVolts 24V 6-9A 150W AC-DC Power Supply Module

SKU CH-AJN5-7675V

Converts 100-240 V AC to 24 V DC at up to 9 A with 150 W continuous power and built-in protection

  • TypeAT
  • Universal 100-240V AC input suits global mains
  • 24V DC output delivers up to 150W continuous power
  • Peak capacity reaches 220W for short bursts
  • Compact 115x65mm board fits tight enclosures
  • Overcurrent, overload and short-circuit protections guard connected gear

Industrial AC-DC module for 24 V systems

This myVolts power supply module converts AC 100-240 V at 50/60 Hz to a regulated 24 V DC output. It delivers 6-9 A for a continuous 150 W rating with a 220 W peak. The open-frame board suits embedded equipment, test benches and custom enclosure builds.

Ripple below 150 mV with full protection suite

Noise ripple stays under 150 mV across the load range. Overcurrent, overload and short-circuit protection circuits are integrated on the board. The 115x65 mm footprint mounts on 105.8x55.7 mm hole centres for secure installation.

Replaces bulkier linear or lower-wattage switchers

This unit upgrades setups that need more headroom than a 100 W module provides without the volume of a cased supply. It is not for builders who require a housed unit with IEC inlet or those needing adjustable voltage rails.

商品特色

  • Universal 100-240V AC input suits global mains
  • 24V DC output delivers up to 150W continuous power
  • Peak capacity reaches 220W for short bursts
  • Compact 115x65mm board fits tight enclosures
  • Overcurrent, overload and short-circuit protections guard connected gear

商品規格

TypeAT

商品問答

How do I mount the 115x65mm board using the 105.8x55.7mm hole pattern?

Align the four mounting holes to the 105.8x55.7mm spacing and secure with M3 standoffs; the step people miss is leaving clearance under the board for airflow.

Which components typically need replacement after extended operation?

The internal electrolytic capacitors are the first parts to age; plan to swap them after several years of continuous 150W load.

At what point does thermal protection engage during sustained 150W output?

The unit will trigger overload protection when internal temperatures exceed safe limits, typically before reaching the 220W peak rating.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。