myVolts
myVolts Dual PSU Adapter Starter Portable Practical 24Pin 20+4 85cm 2000W
Dual PSU adapter links two power supplies to one motherboard via 24-pin and 20+4-pin connectors, adding up to 2000 W for high-demand graphics cards
- TypeAT
- Connects two PSUs for extra graphics power without hardware upgrade
- Supports up to three PSUs on one motherboard
- 20+4 pin main connector works with 24- or 20-pin sockets
- 85 cm cable keeps build tidy and portable
- Rated for power supplies up to 2000 W
Dual PSU Adapter for Multi-Unit Power
This myVolts adapter links up to three power supplies to a single motherboard using one main 24-pin female connector and two secondary 24-pin female connectors. It solves video card power shortages that cause frequency reduction without requiring a PSU upgrade. The cable measures approximately 85 cm and supports combined loads within 2000 W.
Suits builders adding GPU power on existing units
It suits enthusiasts running high-draw graphics cards who want to keep their current power supplies rather than buy a larger single unit. It is not for systems that already have adequate wattage from one PSU or builds where only a single power source is available or desired.
20+4 pin main connector fits 20- or 24-pin boards
The main cable uses a 20+4 pin design that works with both 20-pin and 24-pin motherboard sockets. This single specification determines whether the adapter matches your board, so verify the motherboard connector before purchase.
商品特色
- Connects two PSUs for extra graphics power without hardware upgrade
- Supports up to three PSUs on one motherboard
- 20+4 pin main connector works with 24- or 20-pin sockets
- 85 cm cable keeps build tidy and portable
- Rated for power supplies up to 2000 W
商品規格
| Type | AT |
|---|
商品問答
What does the 2000 W rating mean when the adapter is installed in a system?
It indicates the maximum combined power the adapter can pass from up to three PSUs to the motherboard; actual delivery depends on each unit’s own rating.
How does the 24-pin 20+4 interface affect compatibility with different motherboards?
The 20+4 pin main connector fits both 24-pin and 20-pin ATX motherboards, while the two secondary 24-pin connectors accept standard PSU cables.
What clearance is needed for the 85 cm cables when routing them inside a case?
The 85 cm length gives ample slack for full-tower or dual-chassis layouts; allow space for the ABS connectors and cable bend radius near the motherboard socket.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。



