myVolts
myVolts Switch Power Supply S-720-12 12V 60A 720W pink
A 720 W AT switch-mode unit delivers 12 V at 60 A with overload, over-voltage and short-circuit protection, CCC, FCC and CE compliance, and an aluminium-alloy chassis rated for 0–40 °C operation
- TypeAT
- High efficiency with low DC ripple for stable output
- Operates from 0 °C to 40 °C with long service life
- High insulation strength for safe industrial use
- 100 % full-load burn-in test completed before shipment
- circuit, overload and overvoltage protection built in
Industrial 12V 720W power supply
This switching power supply delivers 12 V DC at up to 60 A for a total of 720 W. It is built for industrial automation, CCTV, LED displays and 3D printers that need a stable DC source. The unit accepts AC input from 170 to 250 V and carries CCC, FCC and CE compliance marks. It suits engineers and technicians who require a fixed-voltage rail for heavy continuous loads.
Sustained-load behaviour
The supply is rated for continuous operation at 100 % load after a full-load burn-in test. Overload, overvoltage and short-circuit protection circuits guard the output during prolonged use. High insulation strength and low DC ripple maintain clean power under steady demand. Operating temperature range is 0 to 40 °C, so enclosure airflow must keep ambient air within that band.
Pre-installation checks
Verify that your mains supply stays between 170 and 250 V AC before connecting the L and N terminals. Confirm the load does not exceed 60 A at 12 V and that wiring gauge can handle the current safely. Ensure the mounting location stays within the 0 to 40 °C operating window and 0 to 95 % non-condensing humidity. Check that the adjustable voltage trim is set correctly for the connected equipment.
商品特色
- High efficiency with low DC ripple for stable output
- Operates from 0 °C to 40 °C with long service life
- High insulation strength for safe industrial use
- 100 % full-load burn-in test completed before shipment
- circuit, overload and overvoltage protection built in
商品規格
| Type | AT |
|---|
商品問答
How much heat and noise does the 720W unit produce when running continuously?
It uses natural convection cooling with no fan, so it runs silently; the aluminium alloy case dissipates heat within the rated 0~40 °C working temperature range.
What cables or connectors must I already have to wire this supply?
You need mains leads for the L and N terminals and suitable DC cables for the V+ and GND screw terminals; no plug-and-play cables are included.
Will the 12 V 60 A output work safely with older 12 V gear that draws less current?
Yes, the unit delivers up to 60 A but only supplies what the load draws, and built-in short-circuit, overload and overvoltage protection guards legacy devices.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。



