我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR5 UDIMM sticks without heat spreaders in a 16 GB kit

NEMIX RAM

NEMIX RAM 16GB 2x8GB DDR5 5600 CL46 UDIMM Kit Supermicro X14SAZ-F

SKU CH-EMN6-E2CJE

A 16 GB DDR5-5600 dual-channel kit built with major OEM chips and tested for the Supermicro X14SAZ-F motherboard

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 16GB 2X8GB

  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR5 5600 speed matches board-rated frequency
  • CL46 latency at 1.1 V keeps power draw low
  • 288-pin UDIMM form factor fits Supermicro X14SAZ-F slots
  • Major OEM chips tested for stability at rated specs

Exact DDR5 upgrade kit

This 16 GB kit contains two 8 GB DDR5 5600 UDIMM modules built to the exact rank, voltage and timing the Supermicro X14SAZ-F expects. The 1Rx8 Non-ECC unbuffered design matches the board's memory population rules so the full capacity is recognised at rated speed. Builders needing ECC or registered modules should look elsewhere. ||

Sustained throughput stability

Major OEM chips from Samsung Micron or Hynix are tested at the specified 1.1 V CL46 5600 MT/s setting to maintain data integrity during long workloads. The kit delivers consistent bandwidth without down-clocking when the memory controller is under continuous pressure. Systems that require higher frequencies or tighter latencies will not reach those targets with this kit. ||

Thermals and power profile

Operating at 1.1 V the modules draw minimal power and run cool without a heat spreader in typical desktop airflow. Acoustic impact is negligible because no active cooling is attached. Builds with restricted air circulation or extreme overclocking goals may need additional thermal management.

商品特色

  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR5 5600 speed matches board-rated frequency
  • CL46 latency at 1.1 V keeps power draw low
  • 288-pin UDIMM form factor fits Supermicro X14SAZ-F slots
  • Major OEM chips tested for stability at rated specs

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K2
Capacity16GB (2 x 8GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB 2X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How much power will the 1.1 V DDR5-5600 kit draw when the system runs all day?

The modules operate at 1.1 V with a CL46 latency rating. DDR5 moves voltage regulation onto the DIMM itself, so sustained draw stays low and heat output remains modest without a heat spreader.

What must the motherboard provide for this 288-pin UDIMM kit to function?

The board needs DDR5 UDIMM slots that accept 1.1 V, non-ECC, unbuffered 1Rx8 modules at 5600 MT/s. The Supermicro X14SAZ-F is verified for this exact configuration.

Will the CL46 5600 MT/s kit run at its rated speed on the Supermicro X14SAZ-F alongside any existing DIMMs?

The kit is spec-matched to the X14SAZ-F memory-population rules. If the board supports mixed ranks, the memory controller will train all installed DIMMs to the highest common speed and latency.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。