NEMIX RAM 16GB DDR5 5600MHz CL46 1Rx8 1.1V 288-Pin UDIMM Supermicro X13SAE-F memory upgrade
- 16GB
- 288-Pin DDR5 UDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
A 16 GB DDR5-5600 dual-channel kit built with major OEM chips and tested for the Supermicro X14SAZ-F motherboard
Size 16GB 2X8GB
This 16 GB kit contains two 8 GB DDR5 5600 UDIMM modules built to the exact rank, voltage and timing the Supermicro X14SAZ-F expects. The 1Rx8 Non-ECC unbuffered design matches the board's memory population rules so the full capacity is recognised at rated speed. Builders needing ECC or registered modules should look elsewhere. ||
Major OEM chips from Samsung Micron or Hynix are tested at the specified 1.1 V CL46 5600 MT/s setting to maintain data integrity during long workloads. The kit delivers consistent bandwidth without down-clocking when the memory controller is under continuous pressure. Systems that require higher frequencies or tighter latencies will not reach those targets with this kit. ||
Operating at 1.1 V the modules draw minimal power and run cool without a heat spreader in typical desktop airflow. Acoustic impact is negligible because no active cooling is attached. Builds with restricted air circulation or extreme overclocking goals may need additional thermal management.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin DDR5 UDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB 2X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The modules operate at 1.1 V with a CL46 latency rating. DDR5 moves voltage regulation onto the DIMM itself, so sustained draw stays low and heat output remains modest without a heat spreader.
The board needs DDR5 UDIMM slots that accept 1.1 V, non-ECC, unbuffered 1Rx8 modules at 5600 MT/s. The Supermicro X14SAZ-F is verified for this exact configuration.
The kit is spec-matched to the X14SAZ-F memory-population rules. If the board supports mixed ranks, the memory controller will train all installed DIMMs to the highest common speed and latency.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?