我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Six green DDR5 RDIMM modules in static shielding bags

NEMIX RAM

NEMIX RAM 384GB (6x64GB) DDR5 5600 CL46 1.1V 2Rx4 ECC Registered RDIMM for Supermicro H14DSG-O-CPU

SKU CH-BZVH-K5DHC

384 GB DDR5-5600 ECC registered kit with six 64 GB modules at CL46 and 1.1 V for Supermicro H14DSG-O-CPU

  • Capacity384GB (6 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 6X64GB

顯示另外 30 款選項
  • 384 GB total capacity from six 64 GB modules
  • DDR5 5600 speed with CL46 latency at 1.10 V
  • Registered ECC design corrects single-bit errors automatically
  • 2Rx4 288-pin RDIMM form factor matches Supermicro H14DSG-O-CPU
  • Built with Samsung, Micron or Hynix chips for enterprise reliability

Exact-Match 384GB DDR5 Kit

This 384GB kit contains six 64GB DDR5-5600 RDIMMs built to the exact rank, voltage and timing the Supermicro H14DSG-O-CPU memory controller expects. Each module runs at 1.1V with CL46 latency and 2Rx4 organization. Registered ECC architecture offloads the controller and corrects single-bit errors to prevent silent data corruption in production workloads.

For Full-Population Server Builds

Suited for administrators populating every DIMM slot on the H14DSG-O-CPU with validated registered ECC memory at rated speed. Not for systems that require unbuffered UDIMMs, SODIMM form factors, non-ECC modules or speeds other than DDR5-5600. Buyers needing different capacities or voltages should consult their motherboard manual for supported configurations.

288-Pin Registered DDR5 Form Factor

The 288-pin RDIMM form factor is the single specification that determines whether this kit fits the board. The Supermicro H14DSG-O-CPU requires registered DDR5 DIMMs; unbuffered or SODIMM modules are physically and electrically incompatible. Verify your system manual for approved population order before installation.

商品特色

  • 384 GB total capacity from six 64 GB modules
  • DDR5 5600 speed with CL46 latency at 1.10 V
  • Registered ECC design corrects single-bit errors automatically
  • 2Rx4 288-pin RDIMM form factor matches Supermicro H14DSG-O-CPU
  • Built with Samsung, Micron or Hynix chips for enterprise reliability

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K6
Capacity384GB (6 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 6X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What does the 5600 speed rating mean when all six 64 GB modules are installed in the Supermicro H14DSG-O-CPU?

The kit is spec-matched to the board so the memory controller recognises the full 384 GB and runs every module at DDR5 5600 with CL46 latency.

How does the 288-pin Registered ECC interface limit or enable performance on this motherboard?

Registered buffering offloads the controller, allowing all slots to run fully populated at the rated 5600 speed while ECC corrects single-bit errors on the fly.

What physical clearance or slot requirements should I check before fitting these 2Rx4 RDIMMs?

The modules are standard 288-pin DDR5 RDIMMs without heat spreaders; verify the motherboard manual for the approved population order and slot spacing.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。