我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Six green DDR5 RDIMM modules in anti-static packaging

NEMIX RAM

NEMIX RAM DDR5 4800 384GB 6x64GB ECC RDIMM Supermicro H13DSG-O-CPU-D memory upgrade

SKU CH-AB9P-80SNF

A 384 GB registered ECC DDR5 kit of six 64 GB modules running at 4800 MHz with CL40 latency and 1.1 V for the Supermicro H13DSG-O-CPU-D motherboard

  • Capacity384GB (6 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 384GB 6X64GB

顯示另外 30 款選項
  • 384 GB total capacity from six 64 GB modules for maximum server density
  • DDR5-4800 speed with CL40 timing matches the memory controller specification
  • Registered ECC architecture corrects single-bit errors and enables full-slot population
  • 1 V operating voltage reduces power draw under continuous load
  • 288-pin RDIMM form factor verified for Supermicro H13DSG-O-CPU-D motherboard

Capacity and form factor

This is a 384GB kit of six 64GB DDR5 registered ECC RDIMMs built for the Supermicro H13DSG-O-CPU-D motherboard. Each module uses a 288-pin layout and 2Rx4 organisation so the memory controller sees the exact rank structure it expects. The kit is designed for servers that require registered memory to run fully populated at rated speed.

DDR5 registered ECC limits

Registered DIMMs buffer the command and address bus, allowing all slots to be filled without overloading the memory controller, while ECC corrects single-bit errors on the fly. The modules operate at 1.1V with a CL40 latency at the DDR5-4800 data rate. Systems that require unbuffered UDIMMs or SODIMMs cannot use this kit, and boards with stricter population rules may not support a full six-module installation.

Speed grade and rank

The decisive specification is the DDR5-4800 (PC5-38400) speed grade combined with 2Rx4 registered ECC organisation at 1.1V. If your platform demands a different data rate, voltage, rank configuration or unbuffered modules, this kit will not be recognised or will run at a reduced speed. Verify the motherboard's qualified vendor list before purchase.

商品特色

  • 384 GB total capacity from six 64 GB modules for maximum server density
  • DDR5-4800 speed with CL40 timing matches the memory controller specification
  • Registered ECC architecture corrects single-bit errors and enables full-slot population
  • 1 V operating voltage reduces power draw under continuous load
  • 288-pin RDIMM form factor verified for Supermicro H13DSG-O-CPU-D motherboard

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K6
Capacity384GB (6 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 6X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Should I choose this 6 x 64 GB kit or a smaller capacity for my Supermicro H13DSG-O-CPU-D?

This 384 GB kit fills six DIMM slots with 64 GB modules, matching the board's DDR5-4800 registered ECC requirements; select it when you need the full capacity the platform allows.

What does DDR5-4800 (PC5-38400) deliver once the modules are installed in the server?

The memory runs at 4800 MT/s with CL40 latency at 1.10 V, providing the rated bandwidth and error-correcting stability the motherboard's memory controller expects.

How does the 288-pin RDIMM interface limit speed or capacity in practice?

The registered 288-pin DDR5 form factor supports the full 4800 MT/s data rate and 64 GB per module, enabling all six slots to operate at rated speed without downclocking.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。