NEMIX RAM DDR5 96GB 2x48GB 4800 CL40 ECC RDIMM Supermicro H14DSG-O-CPU
- 96GB (2 x 48GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM
A 96 GB DDR5 kit with two 48 GB registered ECC RDIMMs running at 4800 MHz, CL40 and 1.1 V for the Supermicro H13SSH motherboard
Size 96GB 2X48GB
This 96GB kit consists of two 48GB DDR5 4800 PC5-38400 modules built to the 288-pin Registered DIMM form factor. It is intended for administrators upgrading a Supermicro H13SSH motherboard that requires Registered ECC memory with a 2Rx8 rank configuration. The modules operate at 1.1V with a CAS latency of CL40.
Registered buffering reduces electrical load on the motherboard memory controller, allowing full-capacity population across supported slots. ECC circuitry detects and corrects single-bit errors during normal operation, helping to prevent silent data corruption. The absence of a heat spreader means airflow across the PCB handles thermal dissipation at the standard 1.1V operating voltage.
Under continuous load the Registered design maintains consistent signalling to the memory controller, while ECC continues to correct single-bit errors without halting the system. The kit is validated for the Supermicro H13SSH platform, so population rules and rated speed are preserved during extended use. Buyers needing a different capacity or a non-Registered form factor should verify their board's requirements before ordering.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR38400-4828K2 |
| Capacity | 96GB (2 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB 2X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
Align the key notch on each 288-pin module with the slot, press straight down until the retention clips click, and follow the motherboard manual's DIMM population sequence for the H13SSH to enable all 96GB at DDR5-4800.
The modules have no heat spreaders and no moving parts; ECC corrects single-bit errors automatically. If a module fails, replace the faulty 48GB stick with an identical 2Rx8 CL40 1.1V RDIMM to keep the kit matched.
The memory controller's maximum supported bandwidth at 4800 MT/s and the fixed CL40 latency set the throughput ceiling before thermal or voltage limits appear on these 1.1V registered modules.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?